Manualshelf

Installation and Operation Sheet

ManualsBrandsAmantii ManualsFireplacesElectric Fireplace
12345678910
8
OPERATION
The fireplace can be operated either by the switches located on the left front of the fireplace unit or
by supplied remote control.
MANUAL OPERATION
Push to reveal the manual control panel. (As shows in bellow picture)
1. The main power ON/OFF switch in position O, the fireplace is OFF.
2. When main power ON/OFF switch is at position I, the fireplace is ready to use.
3. Press the button repeatedly to set the heater to desired heat setting. The heater indicator
LED will glow which shows the current heater settings.
a) RED 1500W HEAT OUTPUT
b) BLUE 750W HEAT OUTPUT
c) PURPLE AUTO MODE
Push here to open the manual control panel
AUTO MODE
Under this mode the heater will automatically turn ON at high heat setting 1500W heat output when
the room temperature drops below 22℃(72℉ ). When the room temperature is between
22-25℃(72-77℉ ) the heater output will switch to low heat setting 750W. When the room
temperature goes above 25℃(77℉) the heater will be turned off and the cycle will continue. The
LED indicator will be PURPLE in colour under this mode.
4. Flame effect: Press the button marked
to adjust the flame brightness. The flame brightness
will cycle through –Low-Medium-High -OFF.
5. Mood light effect: Press the button marked
to change the mood light colour.