LECTEUR MOBILITY CLASSIC MP3 www.amarina.
Security Advice 1 Do not use any liquid or aerosol products. Clean with a damp cloth. 2 Never use the device near water. 3 Ensure that no furniture or any other object is touching the cord. 4 All repairs must be carried out by qualified technicians. 5 Follow the installation instructions provided by the manufacturer. Warranty conditions x AMARINA products are sold with a 12-month factory guarantee dating from the time of purchase.
TABLE OF CONTENTS FEATURES SUMMARY ................................................................................. 4 INTRODUCTION ............................................................................................. 5 x Buttons and controls definition .......................................................... 5 x Display screen ................................................................................. 6 x Battery indicator ..................................................................
OTHER SETTINGS …………………………………......................................... 20 x Select different directory ……………................................................... 20 x Delete file .......................................................................................... 20 x Repeat Mode (Playback submenu) ................................................. 22 x Play speed ………………................................................................... 22 x Repeat Mode ....................................................
This product represents a new generation of MP3 players supporting MP1, MP2, MP3, WMA, WAV. FEATURES SUMMARY Ɣ Compact size. Ɣ Supports virtually all music file formats such as: MP1,MP2,MP3,WMA, Ɣ Supports firmware update. Ɣ Supports FM radio. Using Auto-search or manual search, the player can save up to 40 different radio stations. The frequency varies from 87Khz to 108Khz. Ɣ No need to have any driver for Windows 2000 or above.
INTRODUCTION Congratulations on purchasing of this MP3 player! Before starting to use it please, read this manual carefully. Due to the constant production improvement, the MP3 Player you have purchased might be slightly different from the one described in this manual. x Buttons and controls definition - Express Forward; - Express Backward; - Play/Pause 1� “Play/Pause”: Power ON/PLAY/STOP/OFF. 2� “Mode”: General confirmation button. 3� “VOL+”: Increase volume. Speed up. 4� “VOL–”: Decrease volume.
x Display screen x Battery indicator Displays the battery current charging status. When the battery is fully charged it will be displayed as on the picture (black square). When the battery is low the square will became empty. MAIN FUNCTIONS x Enter the Menu Press “Mode” button to enter the menu. There is the main menu and lots of submenus.
o Recording playback mode screen: o FM mode screen: o System settings screen: o Connection with PC screen: x Volume adjustment Press “VOL+” to increase the volume. Press “VOL–” to decrease the volume. x Power ON/OFF x Press and hold “Play/Pause” button to turn the Mp3 player on. While the MP3 is playing, press and hold the “Play/Pause” to turn the MP3 player off.
In the Music mode press the “Play/Pause” button to playback the music. x Record/Pause In the Record mode press this button to start or stop recording, press the button for more than 2 seconds (long time press) to stop the recording. In any mode press the “Mode” button for 2 seconds (long time press) to enter the main menu. x Music playback Please, follow the steps below 1. Connect your earphone to the earphone jack of the MP3 player. 2.
If the song name is: Love.mp3 Then the song text file should be: Love.lrc o How to make sure the MP3 player has recognized the .LRC file with the song text? The icon in the left corner of the screen during the music playback will look like the song has the text, otherwise the icon will look like “ ”. Below is the example of the screen with the song text: x Voice recording The MP3 player can save up to 99 recorded files in its memory. R Recording 1. Enter the Main menu: 2.
If you get the message “Disk full” on the screen, that means there is not enough space to save the recorded file, you should delete the file to get the space. If you get the message “Directory full” on the screen, that means that the recorded files quantity exceeded 99, you should save the recorded file to another directory. During the recording, only the “Play/Pause” button can be used. R Select recording type 1. Enter the Record submenu pressing the “Mode” button 2.
R Playback the recorded file 1. Enter the main menu. button until you select “RPL” 2. Press the 3. Press the “Mode” button to enter the submenu. 4. Press the “Play” button to start the playback. 5. Press “ / ” to select the recorded file. 6. Volume control VOL+ : Increase volume VOL� :Decrease volume x File recorded in .ACT format can be converted to .WAV Use the supplied utility software to convert the recorded .ACT file to the .WAV file. 1. Run the “Sound Converter” software utility.
2. Select the recorded file. 3 .Click “Convert” to create .WAV file.
You can also convert the .WAV file to MP3 format using the same utility. FM Radio To use the FM radio please, follow the steps below: 1. Enter the main menu 2. Press the button until you select “FM” 3. Press the “Mode” button to enter the “FM” menu. 4.
Press the “Mode” button to save this radio station. 7. To choose the previously saved radio station Press the “Play/Pause” button to select and listen to the saved radio station. 8. Volume Control Press Vol+ or Vol- to increase or decrease the volume. : You can save up to 20 radio stations in your MP3 player. : To delete the radio station please refer to the section Delete file below. SYSTEM SETTINGS x How to change the System settings 1. Enter the main menu 2. Press the button to select “SYS” 3.
(Contrast) (Online Mode) (Memory Info) (Firmware Version) (Firmware Update) (Exit) x Sets the Contrast of your LCD Sets the function of the MP3 removable disk Checks capacity of the flash memory Displays the date of the current firmware version Use this setting for the firmware update Exit the submenu System settings explanation ż Setting “Record Time” 1. The screen will look as shown below: 2. Press the “Mode” button to enter the submenu. The screen will look as shown below: 3.
1.Enter the system settings menu 2. Press the button to select ”Back time” 3. Press “Mode” enter the setting 4. Press “ / ” buttons to as shown below: set the time. 5. Press the “Mode” button to confirm and exit. ż Setting “Language”. Please, operate in a similar fashion as the “Back time” setting. ż Setting “Power off“. The same as the “Back time”.
x Use MP3 player as a USB Disk This MP3 player can be used as a USB disk. There is no need to install any driver (with exception of Windows 98) under Windows 2000/XP, Mac OS 10.3 or above, Linux Reshat 8.0 or above. The MP3 player can use the USB port power, so when it is connected to the PC the battery is not used. If you want to playback the music when MP3 player is connected to the computer, during the “wait mode” press the “Mode” button, then you will enter the main menu.
1. Enter the main menu 2. Press the button to select “Sys Set” 3. Press the “Mode” button to enter the “Sys Set” submenu. 4. Press the button to select the “firmware update”, then press the “Mode” button to enter the submenu. 5. Connect your MP3 player to PC. 6. Run“MP3 Player Update” utility 8. Select the new firmware file (you can download it from the www.gembird.
9. Click the “Begin Upgrading” button to update the player.
Firmware update is to improve the mp3 player, however it is not necessary to do that, your MP3 player will work normally without any update. Firmware update used in a wrong way might damage your MP3 player! Before updating please, read the instruction carefully. Make sure that the uploaded file does correspond to your model of the MP3 player. The person performing update is supposed to have some experience in working with computers.
3. Press the “Mode” button again to 4. Press the “ / ” button enter the directory choice to select the desired directory 5. Press the “Mode” button to confirm the choice Note: You can set different directories for “Music Mode”, “Record Mode” and “Playback Mode”. x Delete file In “Music Mode”, “Record Mode”, “Playback Mode” you can delete files and the Radio stations. To do that, follow the steps below: 1. The MP3 should be stopped.(In all modes 2.
5. Press the button to change “NO” to 6. Press “Mode” button to confirm the choice “YES” The choice “Delete All” will delete all the files in the selected directory for the chosen mode (e.g. if the MP3 is in the “Music mode” it will delete all the music files, but not the other ones, such as recorded files) If you prefer to delete the files from your PC when MP3 is connected to the USB port, make sure you use the Safely Remove Device wizard of Windows before you unplug the MP3 player from the USB port.
(Repeat One) (Folder) (Repeat Folder) (Repeat All) ż ż SHUFFLE (Random) Play the songs at random (INTRO) (Preview,Intro) x Repeat one song. Play all the songs in this folder Repeat all the songs in the same folder Repeat all the songs in the MP3 player Play 10 first seconds of each song in the current folder Playback speed During the music playback (only for the MP3 file), it is possible to choose different playback speed (speed up or slow down), the volume will not change. 1.
R A-B Repeat Using this function it is possible to mark the music fragment for subsequent playback. To do that, please follow the steps below: 1. During the music or recorded file playback press the “Mode” button to enter the submenu. 2. Press the button to select the “repeat mode” submenu. 3. Press the “Mode” button to enter the “repeat mode”. You will see the icon “A” will blink. 4. Press the ” button to confirm the point A. On the icon and the letter the letter “B” will now start blinking. 5.
1. The player should be in the A-B 2. Press the button to enter the segment repeat mode “Repeat Mode”. 4. After recording is finished, the MP3 player will first play the original 3. The repeat icon“ ”will change to the MP3 file. The icon on the screen will following icon“ ”. Now the MP3 player change to “ ”. Press the button will record the voice, the recording time is the same as the playback time from the to listen to your recorded file and to point A to the point B. enter the compare mode.
Please refer to the “backlight time” system setting. Repeat interval is the time between two consequent playbacks in the repeat mode (the unit is set in seconds). IMPORTANT! Disk encryption function IMPORTANT! With the supplied utility you can divide the MP3 player into two sections (public and encrypted). Under Windows 2000 SP4 and above you will see 2 disks in this case. Under older operating systems only one removable disk will be seen on your computer.
4. You can select the size of the encrypted part of the disk, then press the “Start” button 5. Press “OK” and then restart your computer. 6. After computer finishes the reboot, you will see two removable disks on your computer (see the comments above about the operating systems before Windows 2000 SP4). Choose the encrypted disk, you will see only three files there (two of which will be hidden), one of them is the .exe file, the size of the disk will appear to be only 300Kb. 7. Run the “RdiskDecrypt.
. 8. Now whenever you connect your MP3 player to the computer, you won’t be able to use it until you enter the user name and the password. Note: If you want to encrypt the disk in the way described above, please, first backup your files, all the data will be lost after the encryption. Warning: Don‘t forget your password and the user name, otherwise you won’t be able to use your disk. In case the password is lost, you can only format the disk to regain the access, but then all your files will be lost.
TROUBLESHOOTING No power Check battery Check your power switch No music is heard in 1. Check the Volume level 2. Check the connection (earphone to the the earphones earphone jack) 3. Check if the music file can be played by the MP3 player. Wrong language Set correct language Can‘t download music 1. Check if the USB cable properly connected to your computer 2. Check if you have installed the driver (under Windows 98) 3.
SPECIFICATIONS Outside Dimensions Weight Display area Computer interface Memory Battery lifetime Recording MP3,WMA,WMV,ASF Music formats supported Temperature range Language support Operating system 31mm×70mm×17mm 25g (not including battery) Lattice (128×32) EL Backlight High speed USB2.0 Flash memory: 128M - 1GB Playback up to 10 hours.