Specifications

13a. A/V Test DVD1 Pass
13b. A/V Test DVD2 Pass
13c. A/V Test AUX1 Pass
13d. A/V Test AUX2 Pass
13.2. Sources AUX3, AUX4, PC1, PC2
Setup
Signal generator = 350mVAC, Sine, 1kHz
Signal input = AUX3, left channel RCA input
Power state of unit: ON
Selected source on unit: AUX3
Volume on unit: MAX (highest volume LED lit).
Bass/Treble on unit = flat (use Eq Flat button on IR remote to reset this)
RGBHV Video Source: AUX3 15p input
RGBHV Video Display: Video 15p output
Procedure
(P/F) The reading on the left line output RCA connector should be 1.1VAC +/- 0.1V
(P/F) The video display should be displaying the video source. Check for a clean,
crisp image with all colours present.
Attach the signal generator to the AUX3 right channel RCA input, and measure the
level from the right line output RCA connector.
(P/F) It should be 1.1VAC +/- 0.1V
Repeat for inputs AUX4, PC1 and PC2, testing L+R audio channels and video
switching.
Values to be recorded
Value Pass Range
13e. A/V Test AUX3 Pass
13f. A/V Test AUX4 Pass
13g. A/V Test PC1 Pass
13h. A/V Test PC2 Pass
14. Mix Inputs
Setup
Signal generator = 440mVAC, Sine, 1kHz
Signal input = Mix left channel RCA input
Power state of unit: ON
Selected source on unit: OFF
Volume on unit: MAX (highest volume LED lit).
Bass/Treble on unit = flat (use Eq Flat button on IR remote to reset this)
Procedure
The mix volume is independent of the front level volume control.
(P/F) The output level from the left output RCA should be 1.1VAC +/- 0.1VAC
Change the signal generator input to the right mix RCA input.
(P/F) The output level from the right output RCA should be 1.1VAC +/- 0.1VAC
Values to be recorded
Value Pass Range
14a. Mix Input - Left 1.0 – 1.2VAC
14b. Mix Input - Right 1.0 – 1.2VAC