Specifications

[Setup for next test] Set the frequency back to 1kHz.
15. Non-Volatile Memory Setting
Procedure
Ensure power to the unit is ON. Press the power button so that the unit is ON and
active.
Select source DVD1.
Remove mains power (without pressing the power button).
Reapply mains power.
(P/F) The unit should come back up in power ON mode, with DVD1 selected.
Values to be recorded
Value Pass Range
15a. NV Memory Test Pass
16. Final check for damage
Disconnect from test bench and inspect for scratches on external paint.
17. Factory setting
Set up the unit for default factory setting as below:
With power to the unit ON,
Select source DVD1,
Set the volume to the LED just to the right of vertical at the top of the knob.
Select source OFF.
Press the power button to turn power OFF.
Disconnect mains power.
Attach tested sticker.