Safety Instructions

NOW YOU ARE READY TO FLY!
If you have successfully synced your TWISTER™ to your controller as explained on page 4 you are now ready
to fly. Before beginning to fly your drone you should familiarize yourself with how to start and stop the
rotors, how to use your Auto Start and Auto Land feature and how the controls work so please carefully
read and familiarize yourself with various control features explained in the next two pages. Once again as a
beginner pilot you should learn how to control your drone in a large open field or park on a day with zero or
very light wind. Do not try to fly your TWISTER™ too high until you become a more experience pilot.
AUTOMATICALLY TAKE OFF / LAND
Make sure you have properly synced The TWISTER™ .
• simply press the “start/land” button on the top of controller, your
TWISTER™ will automatically take off.
• To stop or land the
TWISTER™ just press the “START/LAND” button again and the TWISTER™ will descend
and land automatically.
Tips: You also can move the two control sticks simultaneously down to the outside corners, hold them
until the blades start spinning. Release the control sticks and push up the throttle stick slowly to take
off manually.
In case of emergency : to stop the rotors instantly, simply press the calibrate button on the top of the
controller, located in the center.
SPEED SETTING BUTTON
The TWISTER™ has 3 speed settings; 1 (SLOW) , 2 (MEDIUM) and 3(HIGH). The Default setting when you
first turn on your
TWISTER™ is mode 1 (SLOW) . To increase the speed simply press the speed setting button
(see remote diagram on page 3) You will hear beeping sound, 1 beeping sound indicates slow speed, 2
beeping sounds indicates medium speed and 3 beeping sounds indicate high speed.
NOTE: The use of the Trim buttons are accompanied with a Beep sound. A single long Beep indicates the
product is center trimmed. If there is no beeping sound after press the trim button,it indicates the
maximum rang of the trim on a particular side.
UNDERSTANDING TRIM ADJUSTMENTS
Forward/Backward Trim
• If your TWISTER™ is moving forwards or backwards automatically, you may need to adjust the
FORWARD/BACKWARD TRIM buttons.
•If your TWISTER™ flies forward, push and release the B TRIM button repeatedly until the moving
stops and proper flight is maintained.
•If your TWISTER™ flies backwards, push and release the F TRIM button in the same manner until the
problem is resolved.
• From time to time you may have to adjust the FORWARD/BACKWARD TRIM to ensure the TWISTER™
will hover in mid-air and respond accurately to your commands.
Banking Left/Right Trim
• If your
TWISTER™ is not steadily hovering and is banking to the left or right automatically, you may need
to adjust the BANKING TRIM buttons.
•If your TWISTER™ banks to the left, push and release the R TRIM button repeatedly until the banking
stops and proper flight is maintained.
•If your TWISTER™ banks to the right, push and release the L TRIM button in the same manner until the
problem is resolved.
• From time to time you may need to adjust the BANKING TRIM to ensure the TWISTER™ will steadily
hover in mid-air and respond accurately to your commands.
Forward/ Backward
Trim
Forward/Backward
Trim Controls
Push backward
trim button
Push forward
trim button
If flying forward...
If banking to the right... If banking to the left...
If flying backward...
Left/Right Banking Controls Push the “L” trim button to
increase left banking
sensitivity
Push “R” trim button to
increase right banking
sensitivity
Bank
5 6