Installation Guide

ManualsBrandsAmax Lighting ManualsLightingRound Platter Disk Length 15 in. White New Construction Recessed Integrated LED Trim Kit Round Fixture

Amax Platter Light

TOOLS AND MATERIALS REQUTRED:

SAFETY PRECAUTIONS:

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.

2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON

FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

3. CAUTION-RISK OF ELECTRIC SHOCK. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT

CONDUCTOR.

PACKAGE CONTENTS

PART

DESCRIPTION QTY

Prior to installation,

LED light

1 install mounting plate

B Mounting plate 1

into the junction box

C Mounting screws

2 with mounting screws.

D Wire nut

Drive screws completely

to the end of the junction

box.

2. Connect supply wires

to wires on fixture with

wire nuts. Connect white

to white, black to black

and copper wire to copper

wire as grounding

connection.

FLUSH MOUNT

3. Push the fixture back

convex area into the

junction box space room,

This LED light is suitable to be dimmed by

then turn towards the arrow

Major Brand Model# 6672, Major Brand

direction until fastened.

Model# 6633.

Dimming levels may vary by dimmer.

When wiring , should

consult local licensed

electrician to meet

National Electrical Code

or local Electrical code.

LED-SM11DL

LED-SM15DL

Summary of content (1 pages)

PAGE 1
Amax Platter Light TOOLS AND MATERIALS REQUTRED: LED-SM11DL LED-SM15DL When wiring , should consult local licensed electrician to meet National Electrical Code or local Electrical code. SAFETY PRECAUTIONS: 1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE. 2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. 3. CAUTION-RISK OF ELECTRIC SHOCK.