User Manual

Find a cell tower nearby!
There are a variety of resources available online, here are some third party websites and
app recommended. Use these to locate your nearest cell tower, either by street address
of GPS coordinates.
For U.S. websites:
www.antennasearch.com/
www.cellmapper.net/
www.cellreception.com/towers
For Canada website:
www.cellmapper.net/
APP: Tower Locator (iPhone or Android)
Preparation
You Will Need (make sure the following things and tools are prepared and ready for your
installation. )
• 2~3 hours
• 2 people (a person to help with antenna calibration)
• Drill (if routing cable through wall)
• Recommended: Power Strip with surge protection
Find The dBm Reading On Your Phone
Having an accurate measurement of signal strength in decibels (dBm) is crucial when
installing your system. Decibels accurately measure the signal strength you are receiving.
Test both 3G and 4G signal for best results by turning the LTE off in the carrier settings of
your device.
iPhone: need to download third part APP;
Android: Settings > About Phone > Status or Network > Signal Strength or Network
Type and Strength (exact options/wording depends on phone model).
Note: Turn off your cell phone’s WiFi to ensure you are checking the cellular connection.
The dBm reading will be refreshed every 30-60 seconds. Want faster results? Once you
have a reading, turn on airplane mode. Wait 15 seconds. Turn off airplane mode. The
signal strength reading is refreshed.
4