User Manual for Amazfit Bip
Contents Dial Function Navigation and Buttons Instruction ........................................................................... 1 Dial Function Navigation .......................................................................................................... 1 Keys Instruction ........................................................................................................................ 2 Wrist Placement and Charging .........................................................................
Dial Function Navigation and Buttons Instruction Amazfit Bip watch has a trans-reflective color LCD touch screen and a side button to set it. Dial Function Navigation You can navigate the screen by swiping up, down, left and right. The watch displays the dial interface by default. ⚫ Swipe up to view notifications history. ⚫ Swipe down to access DND (Do Not Disturb) Mode setting and check the battery power and watch connection status. ⚫ Swipe left and right to view all APP features.
Keys Instruction 1. Short Press: ⚫ Wake up the watch screen when the watch is locked ⚫ Return to dial interface when the watch is on sub-interface ⚫ Return to the previous screen when the watch is on other interfaces ⚫ View the activity details when the watch is on sports interface 2.
2. Wearing in Sports Please DO NOT wear your watch too tight and it should also be slightly tighter (snug, but not constricting) during exercise than during all-day wearing. 3. Charging To charge your Amazfit Bip: ⚫ Please attach the USB end of the charger to your PC or a normal charging adapter. ⚫ Insert the watch into its charging base and make sure to align the two charging pins on the backside of the watch with the ones on the charging base.
Watch Functions 1. Watch Display Settings 1) You can choose items like “Status”, “Activities”, “Weather”, “Alarm”, “Timer”, and “Compass” to be displayed on the watch or not. (Open App➡Profile➡My devices Amazfit Bip➡Watch display settings➡Hold the Sort button to rearrange the items) 2) Note: “Watch face” and “Settings” are defaulted to be displayed on the watch. Watch Dial 1. Change the dial on the watch: ⚫ From the home screen of the watch, swipe left you can access Set the watch face.
⚫ Tap and swipe up, you can access watch faces. ⚫ Tap on your selection and confirm by tapping OK, the watch face will update. 2. Change the dial on the Mi Fit App: Open App➡Profile➡My devices Amazfit Bip➡Watch face settings➡Tap on your selection and sync it to your watch 3. DND (Do Not Disturb) Mode Swipe down from the home screen of the watch; Tap on DND, you will have two options: “Now” and “Auto”.
⚫ For Android phones, please enable auto-start and lock Mi Fit App in the "Recent apps"/ "App overview" page. 2. Viewing notifications When the watch receives a notification reminder, it will vibrate and automatically display the content of the notification. If you do not view the notification immediately, you can find it later by swiping up from the watch face. 3. Delete or clear notifications The watch can save up to 10 recent notifications.
4. Status 1) We can see Steps, last-minute heart rate, mileage, calories burned, and sedentary times from “Status” widget. 2) Heart rate will be measured automatically when you tap “Status”. 5. Activity From home screen of the watch, swipe left till you find Activity. For more details, please refer to Activity Tracking. 6. Weather from the home screen of the watch, swipe left till you find “Weather”. Tap “Weather” and view the weather for the current day and the next several days.
⚫ In addition, the watch can receive the weather warning notification when “Weather alert push” is turned on. (Mi Fit App➡Profile➡My Devices Amazfit Bip➡Weather settings➡Weather alert push ) 7. Alarm You can turn off/on the alarm directly from the watch and add another alarm from Mi Fit App. You can store up to 10 alarms on the watch. ⚫ When an alarm vibrates, you have two options “Snooze” and “Stop”. If you tap “Snooze”, it will vibrate later.
8. Timer The timer has a stopwatch and a countdown timer. 1) The stopwatch can be used to record multiple time periods. 2) For countdown timer, you can set a time. And when the time is up, it will vibrate to remind you. 9. Compass From the home screen of the watch, swipe left till you find “Compass”. ⚫ Tap “Compass”, it will show you a figure 8 pattern. Move your watch around in a figure 8 pattern to calibrate. After calibration successfully, you can see your orientation on the watch screen.
10. Settings From the home screen of the watch, swipe left you can access “Watch face”, “Long press the button”, “Adjust brightness”, “Find device”, “About”, “Factory reset”, and “Turn off” in watch “Settings”. ⚫ Watch face: There are 10 watch faces, which can be applied according to your preferences ⚫ Long press the button: Tap the check mark next to the activity to make it quick start by long press. You can set to quick start outdoor running, treadmill, cycling and walking.
Watch Alerts 1. Incoming call notification: When the watch receives an incoming call, it will vibrate. If you want to hang up the phone, click "Hang up" on the reminder page; If you want to ignore the reminder, click "Silent" or press the key to stop the vibration. Before using this function, please go to the app and turn on the alert. (Mi Fit App➡Profile➡My Devices Amazfit Bip➡Incoming call) 2.
5. Alarms alert: When the alarm on your mobile phone rings, the watch will vibrate to remind you. Before using this function, please go to the app and turn on the alert. (Mi Fit App➡Profile➡My Devices Amazfit Bip➡More➡Watch alarm ) 6. Disconnection reminder: When your watch is disconnected with your phone the watch will vibrates to remind you. Before using this function, please go to the app and turn on the alert. (Mi Fit App➡Profile➡My Devices Amazfit Bip➡More➡Disconnection reminder ) 7.
Activity Tracking 1. Starting Activity There are two ways to start an Activity: ⚫ From the home screen of the watch, swipe left till you find Activity. ⚫ Long press the physical button to quick start an Activity set up already in watch Settings. Amazfit Bip supports outdoor running, treadmill, cycling and walking. Before you start an activity, please check if the storage space on the watch is enough. If it is not enough, the previously unsynchronized activity data may be covered during the activity.
⚫ Heart rate alert: You can set a value to make the watch alert you when ⚫ your heart rate jumps above the value you set. Pace alert: You can set a target pace to make the watch alert you when your pace is below the target pace. ⚫ Distance alert: You can set the desired distance to alert you. (eg: The watch will vibrate when you reach every 2 mile/km) ⚫ Insufficient space alert: The watch will vibrate to remind you whether to continue the activity when there is insufficient space.
4. Basic approach during Activity On activity interface, long press the key to pause the activity; short press the key to switch the screen. You can also switch the screen by swiping up or down manually. 5. Suspending/Continuing/Ending Activity Press and hold the physical button to pause the activity. The paused interface is displayed. And you can tap “Continue” to resume or tap “End” to stop. Note: If you ran less than 50 meters, watch will prompt you that "distance is too short to save". 6.
see an unsynchronized icon on the right side of the list column. After the data is synchronized successfully in the app, that icon will no longer be displayed. Click on an activity record to see the detailed data. 2) Mi Fit App Please open App➡ Click "Activity" right below the app home page to view all activity records that are synchronized from the watch. 7. Deleting Activity History From the home screen of the watch, swipe left to access “Activity”➡ “Activity history”➡ Swipe up till you see "Delete".
9. GPS and A-GPS Tap outdoor running, watch will automatically initiate the search for a GPS signal but you can skip this step at that moment by clicking on the “Skip” button, however it will still search GPS during your activity. 1) If the GPS option is initiated and started, the watch will offer a three-second countdown before tracking begins. You can long press the physical button to “pause” and tap “continue” to continue or tap “end” to stop.
and watch will remind you to update when you start an activity. 10.Heart Rate Zone During activity, the watch calculates your heart rate zone based on your personal information. The heart rate zone will help you determine the effect and intensity of the activity. The current heart rate zone will be displayed next to the heart rate on the watch. After the activity is finished, you can view the duration in each heart rate zone from “Details” page of Activity history on the app.
Warning: ⚫ Amazfit Bip is IP 68 certified which means resistant to dust, rain, splashing, and accidental submersion. It can withstand a maximum depth of 1.5 meter water for up to 30 minutes. The resistance testing is performed in fresh water, normal temperature and under static condition. It shouldn’t be used when you are taking a shower/bath, having a spa, swimming or in the sauna or steam room. ⚫ DO NOT operate the watch underwater.