Amazfit Bip S User Manual Contents Watch Face Functions Navigation and Button Instructions ................................. 3 Functions Navigation .............................................................................................. 3 Physical Button Operations ................................................................................... 5 Wearing and Charging .................................................................................................... 6 Daily Wearing ................
Timer .......................................................................................................................... 21 Compass ................................................................................................................... 22 Music .......................................................................................................................... 23 Settings ................................................................................................................
Watch Face Functions Navigation and Button Instructions Amazfit Bip S features a touch screen with a reflective display and one physical button. Functions Navigation The screen can be navigated by swiping left/right or up/down.
The watch face page is displayed by default, and you may: 1. Swipe up on the watch face page to view historical message notifications. 2. Swipe down on the watch face page, or swipe down on the edge of any other page (except the settings page) to enter the control center, where you can set up Do Not Disturb, screen lock, brightness and music playback on your mobile phone. You can also check the watch's battery level and connection status. 3.
the corresponding function to enter its details page. 4. Swipe right on the watch face page to quickly access Music control, Status, PAI, Heart rate, and Weather. Physical Button Operations Short press the physical button once to: ① Unlock the screen. ② Turn off the screen if the watch face page is currently displayed. ③ Return to the previous menu level if any other page is currently displayed. ④ Scroll up and down on the page during workout. ⑤ Unlock the page when swimming.
Wearing and Charging Daily Wearing During non-workout hours, it is recommended to wear the watch with a moderate tightness at a distance two fingers far from your wrist to ensure that the optical heart rate monitor works properly. Wearing during Workouts During workouts or other exercises, it is recommended to wear the watch comfortably and ensure a tight fit without slipping. Don't be too tight, but don't allow the watch to move freely either. Charging 1.
2. Place the watch onto the charging base. Be sure to align the metal contacts on the back of the watch with the golden pins of the charging base, and keep the watch button pressed firmly against the charging base. 3. After the watch is properly put onto the charging base, the charging icon will appear on the screen, indicating that the watch is being charged. During charging, you can view the current time and receive incoming call alerts and app notifications.
Use of Functions Download the Amazfit app via the mobile phone before using Amazfit Bip S. You need to pair the watch using the Amazfit app to enjoy its full functionality. In addition, a paired watch allows the saving of data generated on the watch to your personal account in the cloud. Device Pairing and Unpairing 1. Please download the Amazfit app through the application stores, and register or log into your account. 2.
Watch Face 1. To replace the watch face, either long press the watch face or go to "Settings → Watch face settings", swipe left and right to browse through the available watch faces, and tap the new watch face to complete the replacement. 2. Go to the Watch face settings page. If you see a custom button under the thumbnail, it means the watch face is editable. Use tapping or swiping to switch the functions displayed in the currently selected box, which is highlighted.
1. Do Not Disturb mode Tap the Do Not Disturb mode icon to go to the Do Not Disturb settings. When the Do Not Disturb mode is enabled, the watch won't vibrate when it receives incoming call alerts, SMS, app notifications, e-mail alerts or nudge alerts. Select "Auto turn on" and the DND mode is automatically enabled after you go to sleep wearing the watch.
2. Screen lock Tap the screen lock icon to enable or disable the screen lock feature. With the screen lock function on, the watch can only be unlocked and operated by using the watch button. This can prevent any error caused by unintentional screen touches. Tap the screen lock icon again to turn ff the screen lock function. 3. Brightness adjustment Tap the brightness adjustment button to go to the brightness adjustment settings. Tap the "➕" or "➖" buttons to lighten or dim the screen. 4.
Tap the music icon to enter the music control interface. Via its Bluetooth connection, the watch can pause or resume music playback on the phone, switch between songs, and adjust the volume. ① Open the music player on your phone first, and then enable the music function on the watch. ② If you are using an iOS device, you need to pair and connect the watch with the Amazfit app ③ If you are using an Android device, you need to enable notification reading permission in the app.
certain processes running in the background, which will close the connection between the watch and the app, and as a result no reminder will be received. Go to "Profile" - "Amazfit Bip S" - "Run in the background" to learn how to set this in different mobile phone OS. View Notifications When the watch receives a notification alert, it will vibrate to remind you and automatically display the notification content.
Delete or Clear Notifications The watch can hold the last 10 notification messages. When this limit is reached, the earliest notification will be automatically deleted each time a new notification is received. If the content of a notification cannot be displayed in one screen, the second and the third screen will continue to display the remaining content. If there is still any portion left, it will not be displayed. 1. Swipe left on a notification content page to display the Delete button.
2. Swipe up to the bottom of the notification list to display the Clear button. Tap it to clear all notifications. Watch App Settings Watch app refers to various functions that can be used independently on the watch, such as Status and Workout By default, the apps are displayed in the order shown in the following figure. You can customize the app displayed on the screen based on your personal preferences.
Heart Rate 1. The watch will start heart rate measurement automatically once the heart rate details page is opened. During measurement, it's required to properly wear the watch and keep the back of the watch fairly close to your skin until the watch can measure a stable heart rate. 2.
turn on the all-day measurement function. Notes: With the all-day measurement function on, the watch will regularly measure your heart rate. PAI 1. Open the PAI details page to view the current PAI score and the PAI range in which this score is located. 2. Swipe up on the PAI details page to view the PAI trends for the last seven days. 3. Open the PAI page in the Amazfit app to learn more about PAI.
Note: To use the PAI function, you need to enable all-day measurement by opening the Amazfit app, go to "Profile – Amazfit Bip S – Heart rate detection", and choose to enable all-day measurement. Workout Amazfit supports ten workout modes: outdoor running, indoor running, outdoor cycling, walking, open water swimming, and pool swimming etc. See the "Workout" section to learn more about the functions available under different workout modes.
Weather On the weather page, you can view the weather for the current and next few days. The weather displayed by the watch comes from updates pushed by the mobile phone. Therefore, you need to keep the Bluetooth connection between your mobile phone and the watch active in order to receive the latest weather updates. In addition, when a weather alert is received, the watch will receive the alert as well.
Alarm Clock You can turn on or off the alarm directly on the watch screen, and add and edit alarms via the Amazfit app. You can set up to 10 alarms on your watch.
Turn on the snooze alarm and the watch will vibrate to remind you when the time is up. To turn off an alarm, tap the "Turn off" button on the watch. If you need another reminder after 10 minutes, tap the "Remind later" button on the watch. If the alarm vibrates six times without any operation, the alarm will be turned off after the sixth vibration. Timer The timer has two options: stopwatch and countdown. The stopwatch can be used for multiple time records.
can be used to set a single time limit, and the watch will vibrate to remind you when it's reached. Compass You need to wear the watch and complete a calibration process when you enter the compass page for the first time. The latitude and longitude data have to be obtained via GPS signals in an open space outdoors. It will take some time to enable GPS positioning. Please wait patiently. To avoid signal interference, please keep away from any magnetic field when using the compass.
Music When your mobile phone is playing songs, the watch will display information on the song that is being played. You may tap the pause button on the watch to pause the playback, or tap the switch button to switch to the previous or next song at any time. The volume can be adjusted by clicking on Volume buttons "+" and "-". Before you use the music control function you need to pair and connect the watch with the phone first.
permission via the app first. To enable this, go to "Amazfit Bip S" -> "App alerts" page in the app, and configure this permission in the status bar. Notes: The compatibility of the Android mobile phone system and the support available in different music players may to a certain extent affect the music control capability of the watch. Settings The Settings cannot be set to hidden.
brightness, find your phone, about and regulatory information, turn off and reset. Watch face: the watch currently has 4 built-in watch faces, which can be switched based on your preferences. Long button press settings: Select a workout item to quickly start when the watch button is pressed and held. Brightness adjustment: brightness is divided into 5 grades, and you may press "+" or "-" button to adjust the screen brightness.
Watch Status Alerts Incoming Call Alert When the watch receives incoming calls, it will vibrate to remind you. In the alerts page, tap "Hang up" if you need to hang up, and tap "Ignore" or short press to stop the vibration if you need to ignore the alerts. Before using this function, you need to enable incoming call alerts on the app. Idle Alert When you are sitting for a long time, the watch will vibrate to remind you to get up for a while. Before using this function, you need to enable idle alerts.
envelope alerts on the app. Disconnection Alert When the watch is disconnected from the mobile phone, the watch will vibrate to remind you that the watch and the mobile phone are disconnected. Before using this function, you need to enable disconnection alert on the app.
you. Before using this function, you need to enable event reminder Quick Access Settings You can set which apps can be quickly viewed by swiping right on the watch face page. Currently, the apps that can be set are: Music, Status, PAI, Heart rate, and Weather. Introduction to the Workout Function Start Workouts There are two approaches to starting a workout: 1. Select a workout mode in the workout menu to start; 2. Long press the watch button to quickly start a preset workout.
Before starting a workout, the storage space on the watch will be checked. If not enough space is left, any old workout data that have yet to be synchronized might be overwritten. In order to ensure this does not happen, we recommend that you connect with the app to synchronize workout data as soon as possible after the workout. The following workout modes require GPS positioning for track recording: outdoor running, outdoor cycling, walking, and open water swimming.
Pace Alert When the real-time pace is slower than the set value during a workout, the watch will vibrate to remind you that your pace is too slow and display your current pace. Before using this function, you need to enable pace alert in the workout settings page.
remind you of the current mileage and the pace or speed during the past one mile workout. Before using this function, you need to enable lap alert on the workout settings page. Insufficient Space Alert If there is insufficient space during workouts, the watch will vibrate to remind you whether to continue the workout. If you tap "Continue", unsynchronized workout data will be overwritten. If you tap "End", you will end the workout.
For a swimming workout mode: The screen will be locked automatically when it is turned off during workout, and you can’t turn it on by swiping. The screen can only be operated by pressing the watch button to unlock it.
Pause/Continue/End the Workout Long press to pause the workout. The paused interface will be displayed. If you tap "Continue", the workout will continue to be recorded. If you tap "End", a confirmation prompt will be given based on the current distance. For any nonswimming workout, the record will not be saved if the distance is less than 50m. If the distance exceeds 50m, you will need to confirm again whether to end the workout.
View Workout Results View Historical Workout Records on the Watch Tap Workout and swipe up to see the history entry. Tap it to view the latest saved workout records. If there is any unsynchronized workout record, an unsynchronized icon will be displayed to the right of the list. This icon will be removed once a successful synchronization is performed in the app. You may tap on a workout record to view its details.
Workout Settings Tap Workout and swipe up to see the workout settings entry. You can set whether auto pause, heart rate alert, pace alert, and lap alert should be enabled during workouts, as well as the swimming lane length. When these alerts are enabled, the watch will vibrate to remind you when the set value is reached (see the "Alerts during Workouts" section for details).
to connect to the app to update AGPS data before you start your workout, so it can speed up the positioning process. Introduction to Workout Heart Rate Zones During workouts, the watch will calculate which zones your heart rate belongs to base on your personal information. These zones can help you understand the effectiveness and intensity of your workout. The watch will display your current heart rate zones in the heart rate data column.
Anaerobic At or above 80% and below 90% of the maximum heart rate VO₂ max At or above 90% of the maximum heart rate Daily Maintenance of the Watch 1. The watch is water resistant. It is recommended to clean the watch and watch strap regularly with clean water and dry them with a soft cloth before wearing. 2. Don't use detergents such as soap, hand sanitizer, or bath foam when cleaning to avoid chemical residues from irritating the skin or corroding the device. 3.
