User Manual for Amazfit GTS 2 (English Edition) Contents User Manual for Amazfit GTS 2 (English Edition) ...................................................................................... 1 Getting started............................................................................................................................................... 3 Appearance ...................................................................................................................................
Viewing workout records ........................................................................................................... 17 Activities and Health .................................................................................................................................. 18 PAI.............................................................................................................................................. 18 Activity Goal ..........................................................
Getting started Appearance Power on and off Power on: Press and hold the side button to power on the watch. The start screen will appear. If turning on the watch by long pressing the side button doesn't work, charge the watch and retry. Shut down: When the device is on, press and hold the side button for 5 sec to go to the power menu. You can select to shut down or restart the watch. Force shut down: When the device is on, press and hold the side button for 10 sec to restart the watch.
Wearing & Replacing Watch Strap Put the strap on with comfortable looseness to allow the skin to breathe and the sensor to function. When measuring SpO₂, avoid wearing the watch on the wrist joint, keep your arm flat, maintain a comfortable (appropriately tight) fit between the watch and the skin of your wrist, and keep your arm still throughout the measurement process.
On your phone, start and log in to the Zepp app and scan the QR code displayed on the watch to pair your phone with the watch. Pairing with a new phone: 1. On your old phone, start the Zepp app and synchronize data with the watch. 2. On your old phone, go to the information page of the watch, tap More at the bottom of the page, and unpair the old phone from the watch. 3. Restore the factory settings of the watch, and restart the watch.
Control center On the watch face page, swipe down to go to the control center for the following system functions: Flashlight, Brightness adjustment, DND, Battery saver mode, Screen locked, Find mobile, Volume setting, Theater mode, and Keep screen on. Time System Keep the watch connected with your phone. During data synchronization, the watch automatically follows the system time and time format of your phone, and displays the time in a 12 h or 24 h format.
Double press the side button Start a particular app Press and hold the side button for 5 sec or longer Power on the watch, go to the power page, and force restart
Functions available when the watch is connected to the phone App alerts Keep the watch connected with your phone to receive phone app alerts on your watch. You can swipe up on the watch face page to view the latest 20 alerts in the Notification Center. Setting method: Keep the watch connected with your phone, start the Zepp app, go to Profile > Amazfit GTS 2, and tap App alerts to enable alerts for apps as needed.
1. On your phone, go to Settings, then select "Bluetooth" to turn on the Bluetooth, and set the phone to be discoverable. On the watch, go to App list > Settings > Network and connections > Bluetooth. Ensure the Bluetooth is turned on. 2. Find the watch in the search results for available devices on your phone, and tap to pair them. Or, find your phone in the Bluetooth search results on the watch, and tap to pair the devices. Find Mobile 1. Keep the watch connected with your phone. 2.
Watch Face Watch Face Compilations Some watch faces support compilations. With the compilations, you can view information such as steps, consumption, and weather, or tap a compilation to launch the corresponding app. You can also edit information as needed. Edit watch face compilations: 1. Wake up the watch face, and press and hold the watch face page to go to the watch face selection page. 2. Swipe left or right to preview the watch faces available to the watch.
Add Watch Faces In addition to the built-in watch faces, you can choose online watch faces as desired from the watch face store in the Zepp app and synchronize them to the watch. You can also set your phone images as custom watch faces with the app. Add online watch faces: 1. Keep the watch connected with your phone, start the Zepp app, and choose Profile > Amazfit GTS 2 > Watch face store. 2.
Shortcuts Smart Assistant Swipe right on the watch face to go to the smart assistant page, which supports the easy use and view of various functions and information: 1. View real-time app information, such as progress information such as workouts and count down, which automatically appears on the smart assistant page. 2. View information about items and resident apps, such as your next scheduled event, alarm, and recent heart rate data.
Workout Workout The watch supports 11 workout modes, including outdoor running, walking, outdoor cycling, treadmill, indoor cycling, open water swimming, pool swimming, elliptical trainer, climbing, trail running, skiing, and free training. Wake up the watch, press the side button to go to the app list, select Workout, and tap the workout mode you desire. Then tap GO on the workout preparation page to start recording workout information.
AGPS (Auxiliary GPS) is a kind of GPS satellite orbit information data which helps the watch accelerate the GPS positioning process. Workout Reminders & Settings At the bottom of the workout preparation page, you can tap the "Settings" icon to set the current workout mode. The related parameters vary depending on the workout mode. Workout goal: You can set goal reminders for the target distance, target time, and target consumption.
Auto pause: The watch automatically detects the workout status. When it detects that the workout has stopped, the watch automatically stops recording information about the current workout. When it detects that the workout has started again, the watch continues to record. Real-time graph: You can set the watch to display a real-time graph of the heart rate, pace, speed, and pull speed rate during your workout.
Workout Control Enable the workout app to run in the background: 1. During a workout, if you need to use other functions, press the side key to return to the watch face page and perform other operations. The workout app will continue running in the background. 2. When the workout app continues running in the background, the watch will continuously record workout data and generate reminders based on the workout settings. 3.
Play music: Swipe left on the screen to control music playback on the watch apps or phone apps during your workout. View data: During a workout, you can swipe up or down on the screen to view different data. Control workout: Swipe right on the screen to pause or continue workout, end workout, lock the screen, or adjust watch volume during a workout. Save workout data: When you stop a workout, the workout data is not saved if the distance is too short or the workout time is too short.
Activities and Health PAI PAI is an indicator of personal physiological activity. Based on heart rate data, daily activity intensity, and multidimensional and dynamic evaluation of personal physiological data, PAI is obtained through calculations by an algorithm. PAI does not rely on individual data categories alone. Therefore, it allows you to systematically and comprehensively understand your physical condition.
Idle Alerts To encourage you to have a certain amount of activity every hour when you are awake and reduce the harm caused by sitting for too long, the watch monitors your activity as you wear it. If no activity is detected for more than 1 min at the 50th min of the current hour and you are properly wearing the watch, the watch will vibrate to remind you to do some exercise.
All-Day Heart Rate Monitoring 1. Keep the watch connected with your phone, start the Zepp app, and go to Profile > Amazfit GTS 2 > Health Monitoring to enable All Day Heart Rate Monitoring and set measuring frequency. Then, the watch automatically conducts regular measurement of the heart rate at the set frequency and records your heart rate change throughout the day. 2. Heart rate can change dramatically when you are doing an activity.
Assisted Sleep Monitoring Keep the watch connected with your phone, start the Zepp app, and choose Profile > Amazfit GTS 2 > Health Monitoring to enable assisted sleep monitoring for more accurate sleep information (REM sleep stage). Sleep Breathing Quality Monitoring Keep the watch connected with your phone, start the Zepp app, and choose Profile > Amazfit GTS 2 > Health Monitoring to enable Sleep breathing quality monitoring.
3. Place your arm on a tabletop or a stationary surface, with the watch screen facing up. 4. Remain still during measurement and focus on the measurement. 5. Factors such as hair, tattoo, shaking, low temperature, and incorrect wearing of the watch may affect measurement results, and even lead to measurement failure. 6. The measurement range of this watch is 80%-100%. This function is for reference only and should not be used as the basis for medical diagnosis.
3. If Automatic stress testing is not enabled, you can access the stress app for measurement at any time and view and record the results.
Voice Function Offline Voice Offline voice control allows you to speak to perform most of operations on the watch without connecting to a mobile phone. Offline voice wake up mode: Go to Settings > User preferences > Offline voice control > Wake up mode 1. Respond in 5 sec after you turn your wrist. 2. Responds within 5 sec after the screen lights up. 3. Response during screen lighting.
Select "Respond in 5 sec after you turn your wrist" and "Responds within 5 seconds after the screen lights up" to enable Offline voice. After turning your wrist or lighting the screen, the "Recognizing offline voice" icon appears. Then you can run offline voice commands to perform related operations. If you select "Response during screen lighting" to enable Offline voice, you can use offline voice command words directly without waiting to see the "Recognizing offline voice" icon.
Multimedia Function Music Play local music: The watch supports music playback through your Bluetooth headset or speaker, and also supports playing local music aloud. 1. Add songs: Start the Zepp app and choose Profile > Amazfit GTS 2 > Music. On the Music page, select .mp3 or .wav music files to transfer from your phone to the watch. After completing the transfer, you can play music on the watch. 2. The Music page displays the name and composer of a song.
To enable this function on an Android phone, you need to add the Zepp app to the whitelist or auto-run list in the phone background so that the app always runs in the background. If the Zepp app is killed by the phone's background process, the watch will be disconnected from your phone and you cannot control music playback.
Watch Apps Watch Apps "Apps" refer to the watch functions that can be used separately, such as workout, heart rate, and weather. To use an app, wake up the watch, press the side button to go to the app list, swipe up or down to browse the app list, and tap an app to start it. You can also set frequently used apps as quick access apps to facilitate your use. App List Keep the watch connected with your phone, start the Zepp app, and go to Profile > Amazfit GTS 2 > App Settings.
Weather You can check today's weather, wind, humidity, UV intensity, and other information at any time, as well as the weather information for your current location for the next 7 days. The weather data needs to be synchronized through the mobile network. Therefore, you need to keep the watch connected to your phone to keep weather information up to date. You can set the city and temperature unit (Celsius or Fahrenheit) in the Zepp app.
Compass Before use, you may need to draw the shape of the number 8 to complete calibration, depending on the circumstances. A reminder will appear prompting you to calibrate. After you finish calibration, the watch will display the current latitude and longitude of the watch and the direction it is pointing. To avoid interference and improve accuracy, keep the watch horizontal and keep it away from magnetic fields during use.
Alarm You can add alarms in the Zepp app and on the watch. Alarms can be repeated, enabled, or deleted. Long press alarms that are no longer needed to delete them. When the preset time for an alarm arrives, the watch will vibrate as a reminder. You can instruct it to nap or turn it off. If you choose to nap, it will vibrate again after 10 min. You can only use this function 5 times per alarm. If you do nothing when the watch vibrates, it will automatically turn on nap mode after 30 sec.
Countdown You can set a countdown clock. At the end of the count down, the watch will vibrate to remind you.
Watch Settings Bluetooth Settings On your watch, go to App List > Settings > Network and connections. On the Bluetooth page, find your Bluetooth audio device and tap Pair. Note: If you cannot connect your watch to a paired Bluetooth device, unpair and reconnect them. System Language Settings Start the Zepp app, then go to Profile > Amazfit GTS 2 > Watch settings > System language to change the system language of the watch.
