Amazfit GTR User Manual Content Operating Instructions and Functions Navigation ............................................................................. 2 Basic Operations ....................................................................................................................... 2 Functions Navigation ................................................................................................................ 2 Watch Wearing and Charging...................................................
Operating Instructions and Functions Navigation Amazfit GTR features one AMOLED touch screen and two physical buttons. Basic Operations Slide left and right or up and down: You can switch between different function pages. Tap and exit: You can tap to enter a specific function page and also operate the tap tips on that page. You can slide right to quickly return to the upper-level menu after tapping to enter a certain function page. Button on the upper right: ① Short press to light up the screen.
Slide the watch face up: You can then enter the function list.
Watch Wearing and Charging Daily wearing: During daily use, it is recommended to wear the watch with a moderate tightness at a distance two fingers far from your wrist to ensure that the optical heart rate monitor works properly. Wearing during workouts: During workouts, it is recommended to wear the watch comfortably and ensure a tight fit without slipping. Being too tight or too loose may cause the inaccuracy of detected workout data, so avoid doing this.
Use of Functions Download the Amazfit App via the mobile phone before using Amazfit GTR. You cannot use the entire watch functions nor save and upload watch data to your personal cloud account until the watch is paired by using the Amazfit App. Device Pairing and Unpairing Download the Amazfit App from Google Play Store or App Store and register an account or log in.
Open the Amazfit App and choose "Profile – My devices – Watch – Amazfit GTR" to search the device nearby. Please tap the check-mark when it shows a pairing request on the watch. If a device can be paired by scanning a QR code, with the Amazfit App on, you can directly pair the device by scanning the QR code on your watch. After paired, the watch usually needs to be upgraded. Wait for upgrading with patience.
After the watch is paired and upgraded, its functions are available. Meanwhile, the Amazfit App allows for the watch function-specific operations and settings. To unpair the watch, open the Amazfit App, tap "Profile – My devices – Amazfit GTR" and then swipe up and tap the "Unpair" button. Control Shortcut Menu Pulling down on the watch face page can quickly open the control shortcut menu page. Flashlight Tapping the flashlight icon can open the flashlight function.
right or pressing the button on the upper right. Brightness adjustment Tapping on the brightness adjustment button can go to the brightness adjustment settings. Auto brightness: The watch will automatically adjust the screen brightness upon ambient light. Manual brightness: You can tailor the screen brightness as you wish. DND mode Enable DND: With the DND mode enabled, the watch will not vibrate when receiving any message pushed by the mobile phone.
Smart DND: After you fall asleep with the watch, the watch will automatically enable the DND mode. Disable DND: The DND mode is disabled, so the watch will vibrate when receiving notifications. Battery saver mode The battery saver mode can minimize the power consumption of the watch and improve its endurance. With the battery saver mode on, the watch can only record steps and sleep time, with other functions disabled.
To exit the battery saver mode, long press any button on the watch. Lock screen With the lock screen function on, you can unlock the watch to enter the watch face page only by using the watch button. This can prevent any error caused by mistouch. To close the lock screen function, tap the lock screen button again to close this function.
Replace the Watch Face To replace the watch face on the watch: Long press the watch face page for 2s, or go to "Settings – Watch face settings", slide left and right to scan the watch face, and tap one to complete replacement. To replace the watch face on the App: Tap "Profile – Amazfit GTR – Watch face settings" to download more watch faces on the Watch Face Store. Status Sliding left on the watch face page can enable you to enter the status page which displays the current steps and goal completed.
shows you the steps, distance, calories and idle data. You can also enter the details page by sliding up on the watch face page and choosing "Status". Heart Rate Sliding left on the watch face can enable you to enter the heart rate page, and then the watch automatically starts to measure the heart rate. During measurement, it is required to properly wear the watch and keep the back of the watch fairly close to your skin until the watch can measure a stable heart rate.
Notes: With the all-day measure function on, the watch will measure the heart rate at regular time. Sliding right on the watch face can make the last heart rate value visible. You can enter the all-day heart rate details page by tapping it. Workout Amazfit GTR supports twelve workout types: Outdoor running, Walking, Outdoor cycling, Treadmill, Indoor cycling, Pool swim, Open water swim, Elliptical trainer, Climb, Trail run, Skiing, and Exercise.
Workout Record The workout data on the watch will be stored in workout records, which are shown from the latest to the earliest. Tapping a specific workout record will make the workout details visible. The visible details vary in workout type. The workout record not uploaded to the App will be marked with a little red dot before it. Open the App to synchronize data timely to avoid the loss of workout records.
To delete a workout record on the watch, tap to enter the workout record details page, slide up to the bottom of the page, and then tap the delete button. Weather Tapping the weather function can give you access to the current weather conditions and the weather forecast. If weather data are invisible, you should open the App and connect the device to update the data.
Music With the Bluetooth, the watch can suspend or play the music on the mobile music player, switch between songs, and adjust the volume. Open the mobile music player first, and then enable the music function on the watch. If you are using an iOS device, you need to pair and connect the watch with the Amazfit App. If you are using an Android device, you need to connect the watch with the Amazfit App and also enable the notification reading permission on the App.
Notifications Enable notifications During use, you need to enable the corresponding "App alerts" on the App, and keep the watch and the mobile phone connected. You can also enable the incoming SMS and incoming call alerts as you wish. If you are using an iOS device, you need to pair and connect the watch with the Amazfit App.
Delete notifications The read notification on the watch or the mobile phone will be automatically deleted from the notification list on the watch. To manually delete the notification on the watch, slide left on the notification to be deleted and tap the delete button. Alarm Amazfit GTR supports creating and managing the alarm on the watch. You can also create a watch alarm on the Amazfit App.
cycle. After saved, the alarm can be opened and closed in the alarm list. To create an alarm via the Amazfit App, go to "Profile – Amazfit GTR – Watch alarm" and add an alarm upon the tips on the page. Alarm alert In the case of a watch alarm alert, you can choose to close it or remind you later. To close the alarm, long press any button for 2s within the duration of the alarm alert.
To make a delayed alert, you can, within the duration of the alarm alert, tap the "Z" button at the bottom. Then, the alarm will remind you 10min later. Event Reminder You need to create and manage the event reminder via the Amazfit App. The watch will display your to-do list and vibrate to remind you in the set time. Open the Amazfit App, go to "Profile – Amazfit GTR – Event reminder", and create the event reminder upon the tips on the page.
The watch supports modifying and deleting the event reminder. To modify the event reminder, tap the right arrow on the event reminder list page to modify the event reminder date and time. To delete the event reminder, slide right on the event to be deleted and tap the trash icon to delete it.
Timer The timer on the watch supports one hundredth of a second. To enable the timer, pull up the app list on the watch face and choose the timer app. Tapping the start button can activate the timer to time it right away. During timing, you can also count the number of times by tapping the button on the bottom left on the watch screen (up to 99 times of such operation), and suspend the current timer by tapping the button on the bottom right on the watch screen.
Count Down To enable the count down, pull up the app list on the watch face and choose the count down app. By default, the watch supports the shortcut count down of 1min, 3min, 5min, 10min, 15min, 20min, 30min, and 60min. You can enable the count down function right away by tapping it. A custom count down function is available, which ranges from 1min to 23h and 59min.
You can suspend, resume or stop the count down function anytime when it operates. When time's up, the watch will vibrate to remind you. You can close the count down function by tapping the "×" button at the bottom. Find Device Amazfit GTR supports finding the device via the Bluetooth. To enable this function, slide up the app list on the watch face page and tap the find device function.
a failure prompt will display and then you can try again. When found, the mobile phone will beep. You can close the ring on the mobile phone by tapping the tip button on the watch. Meanwhile, the mobile phone will produce a message on the notification bar. Tapping the message can draw back the Amazfit App and close the ring on the mobile phone.
Sliding up on the compass page can enable you to enter the atmospheric pressure page. The barometer on the watch displays the current air pressure in real time.
Sliding up on the air pressure page can enable you to enter the altitude page. The altitude requires double calibration of watch barometer and GPS. If you want more accurate altitude data, try to get the satellite positioning in an open area as soon as possible. Settings The watch settings page includes some watch settings and built-in control functions. Watch face settings: You can quickly switch between watch faces.
Screen-on duration: You can control the screen-on duration of the watch for 8s (by default) to 15s (max). Quick start: You can short press the button on the bottom right to quickly start one watch function (by default, workout list). System: It supports viewing the firmware version and regulatory information, and controlling the actions of closing and rebooting the watch and performing the factory reset.
Workout Function Amazfit GTR supports twelve workout types: Outdoor running, Walking, Outdoor cycling, Treadmill, Indoor cycling, Pool swim, Open water swim, Elliptical trainer, Climb, Trail run, Skiing, and Exercise. And the workout types like Outdoor running, Walking, Outdoor cycling, Open water swim, Climb, Trail run, and Skiing support recording GPS-enabled workout tracks.
There are two approaches to enabling the workout function on the watch: If the workout list is set for quick start, then you can quickly enter the workout list by short pressing the button on the bottom right on the watch face page. By default, the last workout type displays. Sliding up on the watch face page and choosing "Workout" can enable you to enter the workout list page and choose the workout you want to start.
If it takes a long time to process positioning, it may be because the buildings nearby block satellite signals, or because the watch is disconnected to the App for a long time, causing the AGPS to be not upgraded. You can open the Amazfit App, connect it to the watch, and try again after the AGPS is updated. It is recommended to ensure GPS positioning is processed successfully before the outdoor workout.
Swimming With the swimming workout enabled, the watch will automatically lock the screen to avoid water drops interfering with the screen display during the workout. To unlock the screen, you can short press any button on the watch, and the screen will be locked again after the watch screen goes off.
Workout Reminder The workout reminder on the watch varies in workout type. For the workout types Running, Cycling, and Walking, the alert will be vibrated once per kilometer by default. You can also set the alerts for other workout types before workouts. See the "Workout Settings" section for more details. Workout Pause and End With the auto pause function on, the watch will automatically pause when the workout end is detected.
Tapping any button during a workout can suspend the workout. Tapping the right button can cancel the pause and resume the workout. Tapping the left button can end the current workout and save the workout performance. Workout Settings Before workouts, you can set some relevant functions. The workout goal supports three types: mileage, duration, and calories. When the set goal is achieved, the watch will vibrate to remind you.
The workout reminder supports five types: distance, pace, safe heart rate, heart rate zone, and pace With a reminder set, the watch will vibrate to remind you as long as the set value is reached during workouts.
With the auto pause on, the watch will automatically detect the workout status. When the workout is stopped, the watch will automatically suspend the current exercise. And the watch will re-record the data when the workout is resumed. The real-time diagram supports demonstrating the real-time heart rate and pace. With the real-time diagram on, a curve is drawn for the fluctuations of the heart rate or pace during workouts.
Notes: Some workout types don't support the above four settings. The settings might slightly vary in workout type.