User manual
How does it work? Page 2
Before you start, make sure your receiver is fully charged.
Step 1
• Turn on your iPod.
• Plug the sender into your iPod.
• The purple LED will ash; the sender is trying to connect with
the receiver.
Step 2
• Turn on your speaker dock.
• Plug the receiver into the AUX socket of the speaker dock.
• If the AUX socket is difcult to access, use the AUX extension
cable.
Step 3
• Press the On/Off button briey (less than 1 second).
• If the purple light ashes, the receiver searches for a connection with the sender.
• If the purple light does not ash you have to reload the battery.
Step 4
• It will take some seconds before the sender and the receiver are paired.
• Once connected the purple light will stop ashing and will shine constantly.
Now you can play your music wirelessly via the speaker
and have full control through your iPod!
Range & performance;
Amazilla® is using 2.4 GHz technology for sending & receiving audio. The
standard range is 12 meters ( 36 ft), but is depending on environmental
conditions such as wi networks, wireless telephones, and other (wireless)
interferences.