Use and Care Guide

Technical
Data Sheet
AMAZING GOOP
®
ALL PURPOSE ADHESIVE
AMAZING GOOP
®
ALL PURPOSE | Rev 05 – Effective: 2016March / Approved: 35TMorgan P a g e | 1
Eclectic Products, Inc.
Manufacturing Facility
101 Dixie Mae Drive
Pineville, Louisiana
eclecticproducts.com
800.349.4667
ISO 9001:2008
Compliant
Quality Management
Systems
Administration Office
Eugene, Oregon
eclecticproducts.com
800.693.4667
Technical Service
800.767.4667
PRODUCT DESCRIPTION
AMAZING GOOP® ALL PURPOSE Contact Adhesive & Sealant bonds with superior strength
to most any material imaginable. It’s perfect for just about any repair!
WHERE TO USE / APPLICATIONS
It’s ideal for repairing everything around the house from broken teacups to loose towel
racks. It’s even sturdy enough to seal cracks in cement or adhere new handles on garden
tools. AMAZING GOOP® ALL PURPOSE adheres glass, plastic, metal, leather, vinyl, rubber,
brick, marble, copper, brass, wood, porcelain, ceramic making it the most versatile and
effective adhesive available.
FEATURES AND BENEFITS
FLEXIBLE – does not become brittle in cold weather
CHEMICAL RESISTANT – safe for applications exposed to dilute acids and dilute caustics
ABRASION RESISTANT – great for bonding objects subject to normal wear
WATERPROOF – can be submerged in fresh and salt water after complete cure
WASHER/DRYER SAFE – safe for use on clothing, fabric and shoes; do not dry clean
TECHNICAL INFORMATION
PROPERTIES
UNCURED MATERIAL
Color:
VOC:
Solvent:
Density:
Solids:
Viscosity:
Tack time:
Set time:
Full cure time:
Storage:
Application Temp:
Freeze/thaw stability:
Shelf life:
Clear
475 grams/liter
Toluene, Petroleum Distillates (flammable)
7.4 lbs/gal
45% by weight, 42% by volume
100,000 cps
2 minutes
45 minutes
Thin film: 24 hours / Thick film: 48-72 hours
Product may thicken when stored in colder temperatures but will not
freeze. If product thickens from colder temperatures, warm to room
temperature before use.
Ideal application temperature range is 50 to 90 °F (10 to 32 °C).
Stable, allow product to warm to room temperature before using
2 years (unopened)
*Depending on material, humidity and temperature.
CURED MATERIAL
Chemical resistance:
UV resistance:
Hardness:
Dielectric strength:
Tensile strength:
Elongation:
Service temperature:
Paint-over time:
Excellent to water, dilute acids & bases
None; paint-over for UV resistance
80 Shore A
400V/mil (ASTM D-149); this is the maximum voltage that can be applied
to a given material without causing it to break down
3800 lb/in
2
(ASTM D-412)
900% (ASTM D-412)
Cured adhesive can withstand temperatures from -40 to 180 °F (-40 to
82 °C) intermittently.
24 hours