SAFETY DATA SHEET Section 1. Identification Trade name : Supermend Hardener (US Only) Product code : 1085331 Date of issue/Date of revision : 3/12/2015. Supplier : Eclectic Products Inc. 1075 Arrowsmith Eugene, OR 97402 541-484-9621 Responsible name Emergency telephone number (with hours of operation) : Regulatory Compliance : CALL INFOTRAC 800-535-5053 001-352-323-3500 24 hours per day, 7 days per week.
SUPERMEND HARDENER Section 2. Hazards identification Response Storage Disposal Hazards not otherwise classified : IF exposed or concerned: Get medical attention. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician. IF SWALLOWED: Immediately call a POISON CENTER or physician. Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
SUPERMEND HARDENER Section 4. First aid measures Ingestion : Get medical attention immediately. Call a poison center or physician. Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous.
SUPERMEND HARDENER Section 5. Fire-fighting measures Extinguishing media Suitable extinguishing media : Use an extinguishing agent suitable for the surrounding fire. Unsuitable extinguishing media : None known. Specific hazards arising from the chemical Hazardous thermal decomposition products Special protective actions for fire-fighters Special protective equipment for fire-fighters : In a fire or if heated, a pressure increase will occur and the container may burst.
SUPERMEND HARDENER Section 7. Handling and storage Precautions for safe handling Protective measures : Put on appropriate personal protective equipment (see Section 8). Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Avoid exposure - obtain special instructions before use. Avoid exposure during pregnancy. Do not handle until all safety precautions have been read and understood. Do not get in eyes or on skin or clothing.
SUPERMEND HARDENER Section 8. Exposure controls/personal protection Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: chemical splash goggles and/ or face shield.
SUPERMEND HARDENER Section 10. Stability and reactivity Reactivity Chemical stability : No specific test data related to reactivity available for this product or its ingredients. : The product is stable. Possibility of hazardous reactions : Under normal conditions of storage and use, hazardous reactions will not occur. Conditions to avoid Incompatible materials Hazardous decomposition products : No specific data. : No specific data.
SUPERMEND HARDENER Section 11. Toxicological information Reproductive toxicity Not available. Teratogenicity Not available. Specific target organ toxicity (single exposure) Name Category Route of exposure Target organs 2-(2-aminoethylamino)ethanol Category 3 Not applicable. Respiratory tract irritation Specific target organ toxicity (repeated exposure) Not available. Aspiration hazard Not available. Information on the likely routes of exposure : Routes of entry anticipated: Dermal, Inhalation.
SUPERMEND HARDENER Section 12. Ecological information Persistence and degradability Not available. Other adverse effects : No known significant effects or critical hazards. Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible.
SUPERMEND HARDENER Section 15. Regulatory information Product name CAS number % Form R - Reporting requirements 4-nonylphenol, branched 84852-15-3 10-30 Supplier notification 4-nonylphenol, branched 84852-15-3 10-30 SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include copying and redistribution of the notice attached to copies of the SDS subsequently redistributed. California Prop.
SAFETY DATA SHEET Section 1. Identification Trade name : Supermend Resin (US Only) Product code : 1085330 Date of issue/Date of revision : 3/12/2015. Supplier : Eclectic Products Inc. 1075 Arrowsmith Eugene, OR 97402 541-484-9621 Responsible name Emergency telephone number (with hours of operation) : Regulatory Compliance : CALL INFOTRAC 800-535-5053 001-352-323-3500 24 hours per day, 7 days per week. Relevant identified uses of the substance or mixture and uses advised against Consumer product.
SUPERMEND RESIN Section 2. Hazards identification Disposal Hazards not otherwise classified : Dispose of contents and container in accordance with all local, regional, national and international regulations. : None known. Section 3.
SUPERMEND RESIN Section 4. First aid measures Eye contact Inhalation Skin contact Ingestion : Adverse symptoms may include the following: pain or irritation watering redness : No specific data. : Adverse symptoms may include the following: irritation redness : No specific data. Indication of immediate medical attention and special treatment needed, if necessary Notes to physician Specific treatments Protection of first-aiders : Treat symptomatically.
SUPERMEND RESIN Section 6. Accidental release measures Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Methods and materials for containment and cleaning up Small spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble.
SUPERMEND RESIN Section 8. Exposure controls/personal protection crystalline silica respirable Appropriate engineering controls Environmental exposure controls OSHA PEL Z3 (United States, 9/2005). TWA: 250 MPPCF / (%SiO2+5) 8 hours. Form: Respirable TWA: 10 MG/M3 / (%SiO2+2) 8 hours. Form: Respirable TWA: 30 MG/M3 / (%SiO2+2) 8 hours. Form: Total dust. OSHA PEL 1989 (United States, 3/1989). TWA: 0.1 mg/m³, (as quartz) 8 hours. Form: Respirable dust ACGIH TLV (United States, 3/2012). TWA: 0.
SUPERMEND RESIN Section 9. Physical and chemical properties Appearance Physical state : Liquid. Color : White. Odor pH Boiling point : Not available. : Not available. : 182.22°C (360°F) Flash point : Open cup: >93.333°C (>200°F) Flammability : Not available. Evaporation rate : >1 (butyl acetate = 1) Lower and upper explosive (flammable) limits : Not available. Vapor pressure : Not available. Vapor density Specific gravity : >1 [Air = 1] : 1.
SUPERMEND RESIN Section 11.
SUPERMEND RESIN Section 11. Toxicological information Information on the likely routes of exposure : Routes of entry anticipated: Dermal, Inhalation. Potential chronic health effects Not available. General Carcinogenicity : Once sensitized, a severe allergic reaction may occur when subsequently exposed to very low levels. : No known significant effects or critical hazards. Mutagenicity : Suspected of causing genetic defects. Teratogenicity : No known significant effects or critical hazards.
SUPERMEND RESIN Section 13. Disposal considerations safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Section 14. Transport information DOT Classification TDG Classification IMDG IATA UN number Not regulated. Not regulated. Not regulated. Not regulated.
SUPERMEND RESIN Section 15. Regulatory information EU Inventory : Not determined. Section 16. Other information National Fire Protection Association (U.S.A.
SAFETY DATA SHEET Section 1. Identification Trade name : Supermend Hardener (US Only) Product code : 1085331 Date of issue/Date of revision : 3/12/2015. Supplier : Eclectic Products Inc. 1075 Arrowsmith Eugene, OR 97402 541-484-9621 Responsible name Emergency telephone number (with hours of operation) : Regulatory Compliance : CALL INFOTRAC 800-535-5053 001-352-323-3500 24 hours per day, 7 days per week.
SUPERMEND HARDENER Section 2. Hazards identification Response Storage Disposal Hazards not otherwise classified : IF exposed or concerned: Get medical attention. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician. IF SWALLOWED: Immediately call a POISON CENTER or physician. Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
SUPERMEND HARDENER Section 4. First aid measures Ingestion : Get medical attention immediately. Call a poison center or physician. Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous.
SUPERMEND HARDENER Section 5. Fire-fighting measures Extinguishing media Suitable extinguishing media : Use an extinguishing agent suitable for the surrounding fire. Unsuitable extinguishing media : None known. Specific hazards arising from the chemical Hazardous thermal decomposition products Special protective actions for fire-fighters Special protective equipment for fire-fighters : In a fire or if heated, a pressure increase will occur and the container may burst.
SUPERMEND HARDENER Section 7. Handling and storage Precautions for safe handling Protective measures : Put on appropriate personal protective equipment (see Section 8). Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Avoid exposure - obtain special instructions before use. Avoid exposure during pregnancy. Do not handle until all safety precautions have been read and understood. Do not get in eyes or on skin or clothing.
SUPERMEND HARDENER Section 8. Exposure controls/personal protection Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: chemical splash goggles and/ or face shield.
SUPERMEND HARDENER Section 10. Stability and reactivity Reactivity Chemical stability : No specific test data related to reactivity available for this product or its ingredients. : The product is stable. Possibility of hazardous reactions : Under normal conditions of storage and use, hazardous reactions will not occur. Conditions to avoid Incompatible materials Hazardous decomposition products : No specific data. : No specific data.
SUPERMEND HARDENER Section 11. Toxicological information Reproductive toxicity Not available. Teratogenicity Not available. Specific target organ toxicity (single exposure) Name Category Route of exposure Target organs 2-(2-aminoethylamino)ethanol Category 3 Not applicable. Respiratory tract irritation Specific target organ toxicity (repeated exposure) Not available. Aspiration hazard Not available. Information on the likely routes of exposure : Routes of entry anticipated: Dermal, Inhalation.
SUPERMEND HARDENER Section 12. Ecological information Persistence and degradability Not available. Other adverse effects : No known significant effects or critical hazards. Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible.
SUPERMEND HARDENER Section 15. Regulatory information Product name CAS number % Form R - Reporting requirements 4-nonylphenol, branched 84852-15-3 10-30 Supplier notification 4-nonylphenol, branched 84852-15-3 10-30 SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include copying and redistribution of the notice attached to copies of the SDS subsequently redistributed. California Prop.