IMPORTANT SAFEGUARDS Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included. ‘When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following: Read Instructions Keep aerosol products before use. away.
= The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. * Aver shard large paper clips, window or insulated envelopes, continuous forms, newsprint, bound pages (for example: notepads, checkbooks, magazines, etc.), transparencies, laminated documents, cardboard, any items with adhesives, hard materials or plastic {except credit cards and CDs).
Before First Use = Check the product for transport damages. « Before connecting the product to the power supply, check that the power supply voltage and current rating comes ponds with the power supply details shown on the product rating label. LATTE Risk of suffocation! Keep any packaging materials away from children — these materials are a potential source of danger, e.g. suffocation. Installation 1. Make sure the basket door is securely closed.
° Operation ABGDPDOOB®B €) Control Switch Using the switch located on the unit, select one of the following settings by sliding the switch either left or right. Auto / On: This setting allows the shredder to be automatically started by Inserting paper Into the feed slot. Always feed the paper in as straight as possible. When the paper has passed through, the shredder will automatically stop. Off: This setting tums off all features of the shredder.
£3 Paper / Credit Card / GD Entry: Auto Reverse Technology When the shredder detects oversensitiveness t capacity shredding, the motor immediately stops and rejects paper before actual shredding begins. €) LED Status Indicators: Walt 45 min /Attendee 45 min. Door open / Overload / Overheat / Power On Power On: The green LED light indicates the shredder is “On” and ready to operate when paper is inserted.
Features a CD/DVD destroyer: * Do not hold CD/DVD with finger through the center ring while fading into the shredder. Serious injury may occur. * Aver feed more than one credit card or CD/DVD at a time. Hold the CD/DVD by the edge and feed one at a time, releasing when shredding begins. Shredder stops when the entire disc is destroyed. Always turn off and unplug the shredder when not in use. This shredder shreds staples and small paper clips.
Ailing procedure: 1. Tum off shredder. 2. Drizzle some oll on a few sheets of paper and feed those pages through the paper feed slot. 3. Tum shredder in reverse mode for 3~5 seconds. Shredder of is NOT included. 4@ Shredder Gil [NEE] Risk of explosion! Do not use depressurization products.
Troubleshooting =(0) Problem Solution Ls The shredder does not + Make sure the unit is plugged in and that work at all. the outlet is in good working order. + Overheating with extends use: In the event that the shredder has shred continuously beyond the maximum running time and overheated, the unit will automatically shut off. If this happens, switch the shredder off for 45 minutes or longer before resuming normal operation. + Shredders with pull-out basket feature a safety power cut off upon bin removal.
Problem Solution How to clear a paper . jam in the shredder. Switch the shredder over into Reverse (REV) mode. While in Reverse, the shredder backs up and loosen the jammed paper. If required, you may need to tug and remove several sheets to effectively clear the machine. When jammed paper is loosened or removed, switch back to the Auto-On mode to continue shredding. Repeat steps if needed.
Problem Solution The shredder is . constantly running while in “Auto (On)” mode. It Is possible that the activation sensor, which starts the shredder, has become blocked with paper. Insert an index card or any rigid sheet of card stock {old greeting card or folded file folder), directly in the center of the feed slot, while applying force to help push the jammed paper through. This will usually clear any paper blocking the activation sensor and feed slot.
FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference In a residential Installation. This equipment generates, uses and can radiate radio frequency energy and, If not Installed and used In accordance with the instructions, may cause harmful interference to radio communications.
Feedback and Help Love it? Hate it? Let us know with a customer review. Amazon Basics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.
