Siedentopf Binocular Compound Microscope Microscopio Compuesto Binocular Siedentopf Microscope Combiné Binoculaire Siedentopf B07TYT8KQL, B07TZRTB9H
English ���������������������������������������������������������������� 5 Español �������������������������������������������������������������� 15 Français ������������������������������������������������������������ 24
J K L A M B AA C N D E F O G Q H R P S T I U Z W V 3
X AB Y AC 4
EN Parts Description A Nose piece P Coarse adjustment knob B 10x objective lens (yellow) Q Fine adjustment knob C 4x objective lens (red) R X-axis translation control D 40x objective lens (blue) S Power socket E 100x objective lens (white) T Power switch F Stage U Brightness adjustment wheel G Condenser V Condenser vertical adjustment knob H Transmitted light lamp W Condenser diaphragm I Base X 25x eyepiece x2 J Eyepiece cover x2 Y 10x eyepiece x2 K Diopter adjustme
EN IMPORTANT SAFEGUARDS Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included. When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following: WARNING It is prohibited to disassemble the machine.
EN • A separate tin or bucket should be used for the disposal of specimen samples and dyes. Any wasted solution should be poured directly down a drain, but never into a sink basin. • Dispose of used specimen samples a household trash immediately after use. • Do not discard any equipment to the fire to avoid violent combustion or explosion. • If the product has to be moved, carry with one hand holding the product at the arm and another hand supporting it at the base.
EN Intended Use • This product is for private use, home schooling, school applications and teaching demonstrations. It is not for commercial use. • This product is intended to be used in dry indoor areas only. • No liability will be accepted for damages resulting from improper use or non-compliance with these instructions. Before First Use • Check the product for transport damages.
EN Operation Switching on/off T • S Connect the adapter (AB) to a power outlet and the other end to the power socket (S). The LED lights up. NOTICE To prevent the bulb in the transmitted light lamp (H) from burning, turn the brightness adjustment wheel (U) setting to the lowest before turning on or off. • Flip the power switch (T) to “I” to turn on the transmitted light lamp (H). • Flip the power switch (T) to “O” to turn off.
EN Observing through the microscope • Remove the eyepiece covers (J) from the adjustable eyepiece housing (L). • Place eyepieces (X/Y) into the adjustable eyepiece housing (L). • Turn the coarse focus knob (P) to adjust the height of the stage (F) to the lowest position. • Look into the eyepiece (I), adjust the brightness of the illuminator (H) using the brightness adjustment wheel (U). • Rotate the nose piece (A) to the lowest magnification power setting.
EN • Adjust the position of the slide using the X and Y translation controls (O, R). • Look into the left eyepiece (X/Y), rotate the fine focus knob (Q) slowly until the image is clear. Adjust the position of the slide if needed. CAUTION Risk of electric damage! Never force the adjustment knobs (P), (Q) and, (V) to turn further once the knob is already restrained from turning. It may cause friction and scratch the lenses. • The condenser (G) is adjusted to focus the light unto the specimen.
EN Cleaning and Maintenance WARNING Risk of damage! During cleaning do not immerse the product in water or other liquids. Never hold the product under running water. Cleaning 30 10 10 0 0 20 10 0 • To clean the product, wipe with a soft, slightly moist cloth. • Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product. Maintenance 12 • After each use, place the dust cover (AC) on the microscope.
EN FCC – Supplier’s Declaration of Conformity Unique Identifier B07TYT8KQL, B07TZRTB9H Siedentopf Binocular Compound Microscope Responsible Party Amazon.com Services, Inc U.S. Contact Information 410 Terry Ave N. Seattle, WA 98109, United States Telephone Number (206) 266-1000 FCC Compliance Statement 1. This device complies with Part 15 of the FCC rules.
EN Specifications Power input: 100-240 V~, 50/60 Hz, 0.8 A Adapter output: 5V Magnification power range: 40x to 2500x Working temperature: -40 to 158 °F (-40 to 70 °C) R.H. range: 10 to 100% Net weight: approx. 24.2 lbs (11 kg) Dimensions (W x H x D): approx. 9.45 x 18.9 x 13 in (24 x 48 x 33 cm) , 500 mA Feedback and Help Love it? Hate it? Let us know with a customer review. AmazonBasics is committed to delivering customer-driven products that live up to your high standards.
amazon.
