Sirio Instructions for Use and Installation

3
www.ambaproducts.com
MAINTENANCE
UPKEEP & CARE
TECHNICAL SPECIFICATIONS
• Before any maintenance operation ensure that the power source is disconnected and that the switch is
in the off position
• Before any maintenance wait for the unit to cool down completely
• Clean the outside surface with a soft cloth and liquid detergent or stainless steel cleaner
• Do not use abrasive cleaning or scouring products
• To maintain the delicate external finishes use the following methods with each finish:
High-quality and high technology, given by a product certified and ratified according to European and American norms for
electrical devices, made of components that meet the standard requirement of current safety regulations: The product’s Heat
Controller is certified ETL Canada and CE with protection degree IP54 that ensures consumer safety.
Surface temperatures of appliances during normal operations are maintained below the temperature of 60–65°c / 140–149°f
without towels, and 90°c / 194°f with towels, as required by following standards:
• For residue buildup do not use extreme pressure on the surface to avoid scratches & damages to the heater
• It is also possible to use a solvent — use caution & make sure to read the technical forms and norms for it’s use
• In case of uncertainty, do not hesitate to contact Amba Products
Amba Products declines any responsibility if these instructions are not followed
• Brushed finishes: rub the soft cloth following the grain of the finish
• Polished finishes: do not rub cloth in a circular motion – do not use excessive force
• Oil-Rubbed Bronze finishes: rub with non-abrasive cloth using warm, soapy water
115v–10A 60Hz UL 2021 SAFETY FIXED AND LOCATION-DEDICATED ELECTRIC ROOM HEATERS
220v--5A 50Hz CE EUROPEAN NORM
CSA C22.2 No. 46 ELECTRICAL AIR-HEATERS, ENVIRONMENTAL PRODUCTS GENERAL INSTRUCTION No. 1
Normal Temperature of Appliance
Temperature of Appliance with Towel
MODEL
SIRIO
60–65°C
85–90°C
140–149°F
185–194°F