1. Overview Accessories 1.1. • • • • • 1.2. Device Bracket User guide Charger Charge cable Main Functions • • • • • • • 1.3. Intelligent power saving IPX5 water resistant grande Tamper alert Strong magnet installation Fast charging 10000mAh battery Listen-in capability Specification Frequency: 900MHz GSM 850/900/1800/1900MHz Location accuracy <10 meters Monitoring range S5 meters Working voltage/current 3.7V/60mA Battery 10000mAh/3.
2.2. GSM Indicator Status Meaning Blinking quickly GSM initialization/No GSM Blinking slowly Connect to the Amber Connect platform Always ON Voice calling feature enabled The GSM Indicator will turn off after the device has been powered on for 3 minutes. Once the device is on, tap the power button to activate the LED, which will turn off automatically after 60 seconds. 3. SIM Card The SIM card should have access to GPRS and SMS. Remove the device cover, switch to OFF and insert the SIM card.
. Installation The device is built with a strong magnet which can be easily attached to any surface with a magnetic pull. To attach the device to a non-magnetic surface, use the 3M foam tape and bracket included in your package. Problems Poor signal Unable to boot Unable to connect to the network Fail to locate Causes The signal waves are unable to transmit when using the GPS tracker in places with poor signal reception, such as tall buildings or basements.
Notice: In this mode, commands will NOT be executed until the device wakes up at preset time intervals. You can force the device to wake up and receive communication by: a. triggering the tamper alert button at the back b. unplugging the battery and plugging it in again. 5.4 Tamper Alert The anti-tamper button will pop out and an alert will be sent if the device has been disassembled.
. App And Web Platforms 6.1. Download App Please download and install the Amber Connect App from your digital App store and follow the onscreen instructions to register your device. 6.2. Web App Visit www.amberconnect.com/portal/customer/login and go to login > customer > sign up and follow the onscreen instructions to register your device. 7. Warning Battery specified by the manufacturer is recommended. Maintenance or service arising from any third party accessories is not guaranteed.
