User Manual

4. Installation
The device is built with a strong magnet which can be easily attached to any surface with a magnetic
pull. To attach the device to a non-magnetic surface, use the 3M foam tape and bracket included in
your package.
Problems
Causes
Solutions
Poor signal
The signal waves are unable to transmit
when using the GPS tracker in places
with poor signal reception, such as tall
buildings or basements.
Relocate to an area with adequate signal
reception.
Unable to boot
Power switch is OFF
Switch to ON
No battery
Charge battery
No SIM card
Insert SIM card
Unable to
connect to
thenetwork
SIM card inserted incorrectly
Check SIM card
SIM card has dust, debris
Clean SIM card
Invalid SIM card
Contact network supplier
Not in GSM service area
Move to GSM service area
Fail to locate
Poor signal
Move to an area with adequate signal
reception
SIM has no access to GPRS
Contact network supplier to get GPRS
service
Always reply "Address inquiry failed"
Contact supplier
5. Operation
5.1 Power ON/OFF
Power on: Press power button for 3 seconds (battery switch is in ON position).
Power off: Press power button for 3 seconds.
5.2 Emergency Number
Set emergency number via App.
5.3 Working Mode
(1) Tracking mode (default): GSM is always ON and location data uploaded in set time intervals.
(2) Ultra-long standby mode: device wakes up and uploads location data based on preset frequency
set up to a maximum of 72 hours of location update.