1.
Please check the product model you purchased carefully as the packing list varies with the model. Overview AVC400 series uses 4G network for communication. For these dual-channel digital video recorders (DVRs), except to be able to record simultaneously, the two cameras can also record locally and live stream remotely at the same time. The front-facing HD camera is used for reel-time recording; while the cabin-view camera with IR LED for monitoring at night time.
2. Subcamera Options Product Model AVC400 Integrated Version Camera 1280x 720/15 FPS/F2. 01 Full color in daytime and monochrome in dim light/No remote camera Usage Monitor the cabin AVC410 Product Model Camera 1280x720/15F P S/F2.0/ Monochrome all day Usage Monitor the driver's head DMS Version Refer to the specifications and features of the product model you purchased. If you have any questions, please contact your supplier. 3.
GPRS LED OFF Device in sleep (ACC OFF) Solid on Network healthy Blue Blink every 1s Defense LED Blue Network error No SIM OFF Device in sleep (ACC OFF) Fast blink< for 30s Vibrating alert triggered Blink every 10s Defense on OFF Defense off 4.
Battery External Battery / To provide 450mAh backup battery for the device to protect it against power outage resulted from sudden power disconnection. 2. Specifications and Features 1. Specifications Category Hardware Item Parameter Remarks Memory 1GB+16GB / Standard Version 4G FDD: B1/B3/B5/B71B8/B9/B20 IDD: B38/B39/B401B41(100M ) 3G WCDMA: B1/B2/B5/B8 2G GSM: 850/900/1800/1900 4G FDD: B2/B3/B4/B5/B7/B12/B17 IDD: B38/B41(100M J 3G WCDMA: B2/B4/B5 2G GSM: 850/1800n900 WiFi 2.
via the platform (web or app) to remotely cut off the fuel and power to the vehicle when an exception occurs. Note: For details about features, refer to the operation guide. 3. Installation Precautions: This device is not suitable for battery electric vehicles (BEVs) and hybrid electric vehicles (HEVs). Use accessories specified by the manufacturer only.
3.3 TF Card Attachment Ensure that the device is ACC OFF before attaching a proper TF card.
3.4 Main Unit Installation 1. Connect the power cable of the device to B+, ACC, and GND of the fuse box on the vehicle. is a reference position. 2. Route the power cable along the A pillar of the vehicle to the upper center of the front windshield. The red dashed line () in the figure is for reference. 3. Select a proper installation position and wipe the position clean. Remove the protective film from the 3M tape of the mounting base and attach it to the position.
.3.5 Installation of Accessories You can select a proper position to install the remote camera according to actual conditions 3.5.1 Remote AHD Camera 1. Face the camera inward and install it to the windshield behind the rear-view mirror (as shown in ) or to the middle of the dashboard (as shown in ). Wipe a selected position clean, remove the protective film from the 3M tape, and attach the device. 2. Use the supplied screwdriver to tighten the screw of the camera, so it keeps at the best angle.
3.5.3 Other Accessories 1. External battery It is used to power the device for a while after its main supply is cut off. Connect the external battery to the corresponding interface on the device and place it in a proper position (such as in the above figure). Note 1. 2. 3. Choose proper accessories based on your actual needs. Select a relay that goes perfectly with the battery of your vehicle.
3.6 Commissioning 1. Check the LED, see 1.3.3 for reference. 2. Check the camera: The camera works correctly if you can view the live video of the camera and switch between the two cameras after logging in to the platform. You can also manually adjust the camera according to your needs. 4. Others 4.1 Battery Safety 1. Use the original battery supplied by the manufacturer only.
5. FAQ How will the Software be upgraded? Firmware can be upgraded by SD card/USB cable/OTA. The result is Ok, but no connectivity Data is displayed. Commamnd is "PING,HTTP" The device will respond to a network delay value, for example, "50ms" What is the Max time interval? You can get a response less than 3 seconds after you send the PING,*** command. Is there any option to change the English accent? The current one is a Chinese accent. You can try to switch language to a British accent.
Aspect ratio:16:9; Resolution: 640*360 Are the Historical videos stored on your server or device only? The video recorded by the device is stored in two places, the main video stream(1920*1080) stored on TF card and sub video stream (640*360) stored on the device's internal storage. How can we retrieve videos in case of an emergency situation? They will be in the Event Video. The video is stored on TF cards, not on our server.
