Troubleshooting guide

Cingular Communication Manager Help
82
See also:
How to create a WiFi Network Profile
How to create a GSM Network Profile
How to remove a Network Profile
How to change Network Profile properties
Profile IP Address
These settings specify the IP address that your system will use when
connected to this network. The default selection, Obtain IP address
automatically, instructs the Cingular Communication Manager to ask the
network to assign it an appropriate address each time it connects. This is
the correct setting for most network profiles.
However, if the network does not support automatic address assignment,
you can enter appropriate values manually by clicking Use the following
IP address. Contact the administrator of the network whose profile you are
configuring to obtain appropriate values for these fields.
Profile DNS server
These settings specify the address of the name server that your system
should use to translate names (i.e. "Cingular.com") to numerical addresses
when connected to this network. The default selection, Obtain DNS server
address automatically, instructs the Cingular Communication Manager to
ask the network to provide the address of a name server each time it
connects. This is the correct setting for most network profiles.
However, if the network does not support automatic DNS server
assignment, you can enter appropriate values manually by clicking Use the
following DNS server address. Contact the administrator of the network
whose profile you are configuring to obtain appropriate values for these
fields.