User manual

16
4. Setup will add program icon to the program folder shown as blow, then click “Next” for further setup.
5. After the installation of utility, please click “Finish”.
3-3-2 SNMP Manager Utility Configuration
1. Click “Start” then, “Program” folder, you will find icon, please press icon “SNMP Configuration Utility:
To execute the program.
2. Please key in “IP Address” for your AP. (Default IP: 192.168.1.250) and click “OK”.
Click “Status” “Basic Setting” “Advanced” “IP Setting” “WEP” “About” Tab to change other function.