Mini Shotgun Microphone TinyMike ATM 216 experience quality.
MADE IN GERMANY ATM 216 CONTENT PAGE Thank you for choosing an Ambient product. 4 ATM 216 DSLR 5 ATM 216 PH 6 Accessories 7 QBS ATMWJ ATB101 ATMB ATMP 7 7 8 8 8 Technical Data 9 Cable Wiring 10 ATM3.5 ATM3.5H ATMEMP 10 10 10 Supplementary Information 11 3 www.ambient.
experience quality. ATM 216 Thank you for choosing an Ambient product. This high quality miniature microphone can work straight of the low voltage power on DSLR or small DV cameras. Alternatively, an active adapter cable allows phantom powered operation, which makes it all the same a suitable accessory for the popular small HD cameras with XLR inputs. Meeting the requirements of most common camera types, the Tiny Mike is available in preconfigured sets, which contain all necessary bits and pieces.
MADE IN GERMANY ATM 216 Miniature Electret Shotgun Microphone for DSLR Cameras ATM 216 DSLR INSIDE Prod.nr. Description 1) ATM216 Tiny Mike, miniature electret shotgun microphone 2) ATMWS Velvet foam wind shield 3) ATHRY Custom Rycote suspension incl. insert and QBS hot shoe mount 4) ATM3.5 Adaptor cable Binder 3-pin to 1/8” mini jack 5) ATM3.5H Adaptor cable Binder 3-pin to 1/8” mini jack, hi-sens. 5 www.ambient.
experience quality. ATM 216 Miniature Electret Shotgun for cameras with 48V Phantom power ATM 216 PH INSIDE 6 Prod.nr. Description 1) ATM216 Tiny Mike, miniature electret shotgun microphone 2) ATMWS Velvet foam wind shield 3) ATHRY Custom Rycote suspension incl.
MADE IN GERMANY ATM 216 Accessories Mounting Adaptor for 3/8" female Threads QBS To mount a microphone suspension or accessory with 3/8" thread to a hot/ cold shoe we invented our sophisticated QBS mount. Thanks to the divided screw the thread can be spread when the microphone is in the perfect position. This way it will lock and protect the microphone from twisting and turning on the camera with rapid movements. The necessary standard hex-wrench is included in the purchased parts package.
experience quality. ATM 216 Hot Shoe Adaptor ATB101 Pivoting hot shoe mount with 3/8" thread Technical Details Dimension: approx. 50 mm Material: POM, aircraft aluminum Weight: approx. 70 g „Tiny Bar“ ATMB „Tiny Bar“ double cold shoe 3/8“ and 1/4“ mount Technical Details Dimension (WDH): approx. 100 x 23 x 25 mm Material: anodized Aluminum Color: blue Weight: approx. 42 g Accessory Mount ATMP Hot shoe accessory mount with additional hot shoe for radio transmitter.
MADE IN GERMANY ATM 216 Technical Data Polar pattern Hyper cardioid (mini shotgun) Frequency response +- 2 dB 20- 18000 Hz Sensitivity 17mV/ Pa Equivalent SPL rated at CCIR 33dB Max. SPL 1kOhm 128dB Dimensions Ø 12/ 8 mm x 140 mm Weight (without suspension) 30 g 9 www.ambient.
experience quality. ATM 216 Cable Wiring Adaptor Cable ATM3.5 “Tiny Mike” adaptor with 3.5 TRRS right angle plug Binder 3-pin to 3.5 mm TRS right angle plug Length: approx. 27 cm Adaptor Cable, unpadded ATM3.5H “Tiny Mike” adaptor with 3.5 TRRS right angle plug, unpadded High sensitivity Binder 3-pin to 3.5 mm TRS right angle plug Length: approx. 27 cm Active Cable ATMEMP “Tiny Mike” Adaptor with 3-pin XLR Active cable for 48 Volt Phantom power Binder 3-pin to 3-pin XLR male Length: approx.
MADE IN GERMANY ATM 216 Supplementary Information To guarantee the best experience with your TinyMike, Ambient provides 2 different 3-pin Binder to mini jack interconnection cables: One cable is unmarked and a straight connection to the camera/ recorder while the other one is marked with a yellow sleeve and attenuates the signal level for recording high sound levels.
experience quality. MADE IN GERMANY © 2014, Ambient Recording GmbH Ambient Recording GmbH Schleissheimer Straße 181 C | D – 80797 Munich | vox +49 89 36005510-0 | fax +49 89 651855 www.ambient.de/en | info@ambient.