User Manual

Model: GW3030v2
Revision P1A
USER MANUAL
Gateway GW3030 v2.0
Ambient Systems B.V.
Page 9 of 15
Demmersweg 66 • 7559 BN Hengelo • The Netherlands
T: [phone] • F: [phone] • www.ambient-systems.net
KvK: 08122911 • VAT NL: 81297625381
CHECK.TRACK.TRACE.
5.3 LED indications of network status
After the boot sequence is completed, the Gateway will commence normal operation. The figure below
indicates how the Gateway will display the three network states: (1) Waiting until time and date are set or –in
case of operation on battery- waiting on restoring of mains power (configuration option), (2) normal operation
mode, the Gateway acts as node in the mesh network (i.e. it interacts with devices in the network and via a
USB or RS232 connection with a PC) and (3) the Gateway is temporarily offline due to a change of
configuration, no user intervention required.
Mains powered
Battery powered
The Gateway is waiting
in offline mode until the
time and date are set.
Depending on the
device configuration, it
also might wait until
mains power is restored
in case of battery
power.
Online mode
Temporary offline mode
due to a configuration
change on the device
5.4 LED indications of power status
When the device operates on battery, the network status LED will blink, as explained in the previous section,
while the power status LED is off. The figure below indicates the various states:
Fully charged
Battery is charging