User Manual

Model: MR3000
Revision P1A/18042014
USER MANUAL
MicroRouter MR3000 v2.0
Ambient Systems B.V.
Page 5 of 14
Demmersweg 66 • 7559 BN Hengelo • The Netherlands
T: [phone] • F: [phone] • www.ambient-systems.net
KvK: 08122911 • VAT NL: 81297625381
CHECK.TRACK.TRACE.
3 Introduction
3.1 About This Manual
This manual provides practical information for using the MR3000 v2.0. It addresses its first-time use,
installation and mounting instructions, storage conditions, and so forth.
3.2 Related Documentation
Document
Description
Data Sheet:
MR3000 v2.0
The data sheet of the MR3000 v2.0 contains detailed information
on the specifications.
User Manual:
3000 Series 3
rd
Generation Active RFID
Contains detailed information about installing, deploying, and
configuring 3000 Series network products.
User Manual:
Ambient Studio
Contains detailed information about Ambient Studio, our software
package that can be used for configuring devices, support with
installations, maintain networks, set up remote connections, and so
forth.
Driver Specifications:
IFS_DDI_00-System-R1A, IFS_DDI_03-Network-R2A
Data Sheets, White Papers, DDI Specifications and Manuals can be downloaded from the support section of
our website www.ambient-systems.net.
3.3 Required Tools
In order to verify proper operation of the MicroRouter, the following devices and tools are required:
1. Gateway 3030
A Gateway 3030 or similar type Gateway with power adapter and serial cable
2. Laptop/PC
A laptop or PC is required to run Ambient Studio
3. Ambient Studio
Ambient Studio needs to be installed on the laptop or PC
4. USB to Serial converter
In case the laptop or PC does not have a COM port, a USB to serial converter
!! In some configurations, the ConnectGate blocks certain messages from MicroRouters (e.g. DDI 3:4). If you
have no prior experience with 3000 Series network products, please use a GW3030 as indicated in the
Required Tool section