User Manual

Model: GW3030v2
Revision P1A
USER MANUAL
Gateway GW3030 v2.0
Ambient Systems B.V.
Page 5 of 15
Demmersweg 66 • 7559 BN Hengelo • The Netherlands
T: [phone] • F: [phone] • www.ambient-systems.net
KvK: 08122911 • VAT NL: 81297625381
CHECK.TRACK.TRACE.
3 Introduction
3.1 About This Manual
This manual provides practical information for using the GW3030 v2.0. It addresses its first-time use,
installation and mounting instructions, storage conditions, and so forth.
3.2 Related Documentation
Document
Description
Data Sheet:
GW3030 v2.0
The data sheet of the GW3030 v2.0 contains detailed information
on the specifications.
User Manual:
3000 Series 3
rd
Generation Active RFID
Contains detailed information about installing, deploying, and
configuring 3000 Series network products.
User Manual:
Ambient Studio
Contains detailed information about Ambient Studio, our software
package that can be used for configuring devices, support with
installations, maintain networks, set up remote connections, and so
forth.
Driver Specifications:
IFS_DDI_00-System-R1A, IFS_DDI_03-Network-R2A
Data Sheets, White Papers, DDI Specifications and Manuals can be downloaded from the support section of
our website www.ambient-systems.net.
3.3 Required Tools
In order to verify proper operation of the Gateway, the following devices and tools are required:
1. USB cable (mini)
The Gateway 3030 v2.0 uses USB communication by default
2. Laptop/PC
A laptop or PC is required to run Ambient Studio
3. Ambient Studio
Ambient Studio needs to be installed on the laptop or PC. Please ensure that you have a valid license
for Ambient Studio. A temporary license can be requested by following instructions via menu bar
“Help -> License..” in AmbientStudio. This manual assumes that Windows® 8.1 is being used.