User's Manual
Table Of Contents
- 1 Preface
- 2 Introduction
- 3 Product Overview
- 4 Ambient Network
- 5 Installation
- 6 Configuration
- 7 Deployment
- 8 Example Deployments
- 9 Firmware Upgrades
- 10 Troubleshooting
- 11 Appendices
User Manual
3000 SERIES 3
rd
GENERATION ACTIVE RFID
always a path to the GW for each MR. Ensure that the GW has at least 3 hop 1 connections to reduce
the chance of bottlenecks. Plan additional MRs between MRs that are expected to be too far apart.
Always leave some margin for reduced radio range due to changes in your
environment when making a Deployment Plan!
Always ensure that each MR is in range of at least 2 other MRs with the same or
lower expected hop count!
Always ensure that each GW has at least 3 hop 1 connections!
7.2.1 Infrastructure Bottlenecks
In each deployment, there is a chance of introducing so-called bottlenecks. Metaphorically speaking
bottlenecks are a section of a path with a carrying capacity substantially below that characterising
other sections of the same route. This is often a single connection between two MRs that separate
larger portions of a network (see Illustration 27).
47/73 Ambient Systems B.V.
Illustration 27: Example Bottleneck situation