User's Manual

User Manual
3000 SERIES 3
rd
GENERATION ACTIVE RFID
○ Typical battery life of >3 years
1
○ User-configurable temperature & positioning intervals
○ User-configurable security features
○ User-configurable sleep modes
○ User-configurable alerts
○ Dynamic Event Reporting
■ Temperature Alerts
■ Low Battery Alerts
○ Single screw Mounting
○ SensIO Connector
■ SPI
■ I2C
■ 1-Wire®
2
1.4 Conventions
This user manual uses the following typographical conventions to mark certain portions of text: new
terms, foreign phrases, and other important passages are emphasized in italics.
Everything that represents input or output of the computer, in particular commands, program code,
and screen output, is shown in a mono-spaced font (example) and separated by borders. Within
such passages, italics (example) indicate place-holders; you must insert an actual value instead of
the place-holder. On occasion, parts of program code are emphasized in bold face (example), if they
have been added or changed since the preceding example.
Important comments or reminders are indicated in bold and separated by borders, as follows:
Example
An administrator is generally a person who is in charge of installing and running Ambient Studio. A
user could be anyone who is using, or wants to use, any part of the Ambient Studio system. These
terms should not be interpreted too narrowly; this user manual does not have fixed presumptions
about system administration procedures.
1.5 Definitions
S h o r t - h a n d D e s c r i p t i o n
AGW Auxiliary Gateway
AS Ambient Studio
DDI Device Driver Interface
DDIP DDI Processor (a processor capable of interpreting DDI)
1 Depending on configuration, battery condition, network setup and environmental conditions. Default configuration for this setup
is sampling, logging and transmitting the temperature sensor every 5 minutes, localization once per hour.
2 1-Wire® is a registered trademark of Dallas Semiconductor Corporation
5/73 Ambient Systems B.V.