User's Manual
Version 1.0 ©Copyright 2013, Ambient LLC. All Rights Reserved. Page 8
Problem Solution
For cold weather environments, install lithium batteries.
Make sure the remote sensors are not transmitting
through solid metal (acts as an RF shield), or earth
barrier (down a hill).
Move the display console around electrical noise
generating devices, such as computers, TVs and other
wireless transmitters or receivers.
Move the remote sensor to a higher location. Move the
remote sensor to a closer location.
Temperature sensor reads too high in the
day time.
Make sure the water thermometer is mounted in water.
Consider the following radiation shield if this is not
possible:
http://www.ambientweather.com/amwesrpatean.html
Indoor and Water Temperature do not
agree
Allow up to one hour for the sensors to stabilize due to
signal filtering. The indoor and water temperature
sensors should agree within 2 °F (the sensor accuracy is
± 1 °F).
Use the calibration feature to match the indoor and water
temperature to a known source.
Display console contrast is weak Replace console batteries with a fresh set of batteries.
6 Accessories
The following software and hardware accessories are available for this weather station at
www.AmbientWeather.com
.
Accessory Description
Ambient Weather F007PF
Wireless Probe thermometer
for Reciever Weather
Stations
Add additional remote probe thermometers. Supports up to eight
remote sensors.
Ambient Weather F007PF
Wireless Thermometer for
Reciever Weather Stations
Add additional poor/SPA temperature sensors. Supports up to eight
remote sensors.
Energizer AAAS Lithium
Battery (2-pack) - Batteries
for Long Life and Cold
Climates
AAA lithium batteries for cold weather climates.
7 LiabilityDisclaimer
Please help in the preservation of the environment and return used batteries to an authorized depot.
The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in
wild country and/or in unauthorized grounds strongly damages the environment.