User's Manual
6. FinalInstallationofSensors
6.1 Wind transmitter instatllation. Prior to installation, you will need to calibrate the
wind direction. There is a “S” indicator on the wind vane that indicates South, as shown in Figure 14.
Align this “S” marker in the direction of South.
Figure 14
Fasten the wind transmitter to mounting pole brackets with foot-mounting, two ￠3 bolts and M3
nuts , as shown in Figure 15.
Tighten the mounting pole to your mounting pole (purchased separately) with the four￠5 Bolts and
M5 Nuts assembly, as shown in Figure 16.
Figure 15