Owner Manual

ManualsBrandsAmbient Weather ManualsOutdoor DecorWireless Indoor/Outdoor 8-Channel Thermo-Hygrometer with Four Remote Sensors WS-10-X4

alarm value will flash. To silence the alarm, press any button.

To set the alarm, or adjust the high and low alarm settings, press the CHANNEL/+ button until the

channel indication arrow points at the selected channel.

5.2.2 Alarm Defaults

Channel

Default

Condition

HI ALARM

(temperature) ºF

LOW ALARM

(temperature) ºF

HI ALARM

(humidity) %

LOW ALARM

(humidity) %

1,2,3

OFF

140

-4

Indoor

OFF

5.2.2 Setting the Min and Max Alarm

With the indicator arrow pointing at the appropriate channel, press and hold the ALARM button

for 3 seconds, and the temperature HIGH alarm will flash. Press the CHANNEL/+ button to

increase the HIGH alarm and the MIN/MAX/- button to decrease the HIGH alarm. Press and hold

the + or - button to change rapidly. While the alarm value is flashing, press and hold the ALARM

button for three seconds to toggle the alarm on and off the alarm. The alarm icon will appear

when set, and disappear when disabled.

Press (do not hold) the ALARM button again to enter the LOW temperature alarm. The LOW alarm

for temperature will flash. Press the CHANNEL/+ button to increase the LOW alarm and the

MIN/MAX/- button to decrease the LOW alarm. Press and hold the + or - button to change rapidly.

While the alarm value is flashing, press and hold the ALARM button for three seconds to toggle the

alarm on and off the alarm. The alarm icon will appear when set, and disappear when disabled.

Press (do not hold) the ALARM button again to enter the HIGH humidity alarm. The humidity

HIGH alarm will flash. Press the CHANNEL/+ button to increase the HIGH alarm and the

MIN/MAX/- button to decrease the HIGH alarm. Press and hold the + or - button to change rapidly.

While the alarm value is flashing, press and hold the ALARM button for three seconds to toggle the

alarm on and off the alarm. The alarm icon will appear when set, and disappear when disabled.

Press (do not hold) the ALARM button again to enter the LOW humidity alarm. The humidity LOW

alarm will flash. Press the CHANNEL/+ button to increase the LOW alarm and the MIN/MAX/-

button to decrease the LOW alarm. Press and hold the + or - button to change rapidly. While the alarm

value is flashing, press and hold the ALARM button for three seconds to toggle the alarm on and off

the alarm. The alarm icon will appear when set, and disappear when disabled.

When complete, press the ALARM button again, and the display will return to normal mode.

When a temperature or humidity alarm condition has been triggered, the alarm will sound for 120

seconds, and flash until the temperature or humidity condition is no longer valid. Press any key to

silence the alarm.

The alarm will reactivate automatically once the value has exceeded the alarm limit again. To avoid

repeated alarms, you should disable the alarm function or set it to a new value.

5.2.2 Viewing the High and Low Alarms

With the indicator arrow pointing at the indoor or channel 1-3, press the ALARM button once