Owner Manual

to view the High alarm, and press the ALARM button again to view the Low alarm limits at all.

5.3 Reset Max/Min

With the indicator arrow pointing at the appropriate channel, press the MIN/MAX/- button once

to check the MAX values, press and hold the MIN/MAX/- button for 3 seconds to restore the MAX

values to the current value.

Press the MIN/MAX/- button once again to check the MIN values, press and hold the MIN/MAX/-

button for 3 seconds to restore the MIN values to the current value.

When complete, press the MIN/MAX/- button again, and the display will return to normal mode.

5.4 Temperature Units of Measure

The default temperature units of measure are degrees Fahrenheit. To toggle between degrees Celsius

and degrees Fahrenheit, press and hold the MIN/MAX button for 3 seconds while in normal mode.

5.5 Sensor Search Mode

If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire

the signal:

1. If a specific channel is lost, press the CHANNEL/+ button until the channel indication arrow

is pointing at the appropriate channel.

Press and hold the CHANNEL/+ button for 3 seconds, and the remote search icon will

be constantly displayed for up to 10 minutes.

Once the signal is reacquired, the remote search icon will turn off, and the current value

will be displayed.

2. If new sensors are added, subtracted, or multiple sensor channels are lost, press the

CHANNEL/+ button until the channel indication arrow is pointing at the indoor

temperature and humidity . Press and hold the CHANNEL/+ button for 3 seconds, and

the remote search icon will be constantly displayed for up to 10 minutes. Once the

signal is reacquired, the remote search icon will turn off, and the current value will be

displayed.

5.6 Best Practices for Wireless Communication

Note: To insure proper communication, mount the remote sensor on a vertical surface, such as a

wall. Do not lie the sensor flat.

Wireless communication is susceptible to interference, distance, walls and metal barriers. We

recommend the following best practices for trouble free wireless communication.

1. Electro-Magnetic Interference (EMI). Keep the console several feet away from computer

monitors and TVs.

2. Radio Frequency Interference (RFI). If you have other 433 MHz devices and

communication is intermittent, try turning off these other devices for troubleshooting

purposes. You may need to relocate the transmitters or receivers to avoid intermittent

communication.

3. Line of Sight Rating. This device is rated at 300 feet line of sight (no interference, barriers or

walls) but typically you will get 100 feet maximum under most real-world installations,

which include passing through barriers or walls.

4. Metal Barriers. Radio frequency will not pass through metal barriers such as aluminum

siding. If you have metal siding, align the remote and console through a window to get a clear

line of sight.