User manual

Figure 7

Note: Both sensors have the capability of being placed inside or outside the

refrigerator/freezer, but it is recommended you install it outside. This will extend the battery life,

the sensor life, and improve wireless communication range.

Note: Make sure that the refrigerator surface is smooth and clean, so that suction cups will

not fall off. It is recommended to wet the surface of the suction cup first to improve the seal.

3.2 Wall Mounting

The remote sensor can be mounted to a wall or horizontal surface to measure any temperature medium,

including air, water and soil.

Use a screw or nail (not included) to affix the remote sensor to the wall, as shown in Figure 8.

Note: If measuring outside air temperature, we recommend mounting the sensor in the shade, on

the north side of the house or structure to avoid radiant heat transfer.