Instruction manual

7. Confirm all calendar settings with the SET key and enter the °C/°F TEMPERATURE

UNIT SETTING.

°C/°F TEMPERATURE UNIT SETTING

The temperature display can be selected to show temperature data in °F or °C. (Default °F)

1. The temperature unit is flashing

2. Use the + or MIN/MAX key to toggle between “°F” or “°C”.

3. Confirm with the SET key and enter the WIND SPEED UNIT SETTING

WIND SPEED UNIT SETTING

The wind speed unit can be set as mph (mile per hour), km/h (Kilometer per hour), or m/s

(meter per second). The default unit is mph.

1. Use the + or MIN/MAX key to toggle between the unit “mph”, “km/h”, or “m/s”

2. Confirm with the SET key and enter the RAINFALL UNIT SETTING.

RAINFALL UNIT SETTING (OPTIONAL)

Note: the rain unit setting is only available if there is a rain sensor. Skip this setting by

pressing the SET key again to enter the Relative Air Pressure Unit Setting.

The total rainfall unit can be set as inch or mm. The default unit is inch.

1. Use the + or MIN/MAX key to toggle between the unit “mm” or “Inch”

2. Confirm the unit with the SET key and enter the RELATIVE AIR PRESSURE UNIT

SETTING

Flashing