User manual

(alkaline or lithium, avoid rechargeable) batteries in the back of the display console. All of

the LCD segments will light up for a few seconds to verify all segments are operating

properly.

Figure 4

3. Replace the battery door, and fold out the desk stand and place the console in the upright

position.

The console will instantly display time, indoor temperature and humidity as designated by

the icon. The remote temperature and humidity will update on the display within a few

minutes on the appropriate channel.

While in the search mode, the remote search icon will be constantly displayed.

If you have more than once remote sensor (up to eight remotes are supported), the display

will automatically toggle between sensors until all sensors have reported in.

Do not touch any buttons until the remote sensor has reported in, or the radio search icon

is no longer on, otherwise the remote sensor search mode will be terminated. When the

remote sensor temperature and humidity has been received, the console will automatically

switch to the normal mode, and all further settings can be performed.

If the remote does not update, please reference the troubleshooting guide in Section 8.