User manual

to the next setting.

7. Year. Press the [+] or [-] key to increase or decrease the year. Press the SET key to advance

to the next setting.

8. Alarm Hour. Press the [+] or [-] key to increase or decrease the alarm hour. Press the SET

key to advance to the next setting.

9. Alarm Minute. Press the [+] or [-] key to increase or decrease the alarm minute. Press the

SET key to advance to the next setting.

10. Temperature Units of Measure. Press the [+] key to switch between °F and °C units of

measure. Press the SET key to advance to the next setting.

11. Max/Min Clearing. The Max/Min can be programmed to clear daily (at midnight) or

manually. Press the [+] key to switch between “Clears Daily” and Clears Manually. Press

the SET key to exit setting.

5.2 Day Month/Year/Alarm Display

Press the SET key (do not hold) to toggle between the Day/Month, Year and Alarm Time.

5.3 Time Alarm

To turn on and off the Time Alarm, press the CLEAR/- button and the alarm icon will appear

when set, and disappear when disabled.

5.4 Reset Max/Min

To reset the Max/Min values, press and hold the CLEAR/- button for 3 seconds.

5.5 Indoor/Outdoor Channel Selection

Press the CHANNEL/+ button to switch the display between the indoor temperature and humidity ,

remote sensors 1 through 8, and scroll mode . In scroll mode, all of the indoor and detected

outdoor sensors will be displayed in five second intervals.

5.6 Sensor Search Mode

If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire

the signal:

1. If a specific channel is lost, press the CHANNEL/+ button to display this channel, then Press

and hold the CHANNEL/+ button for 3 seconds, and the remote search icon will be

constantly displayed for up to 10 minutes. Once the signal is reacquired, the remote search

icon will turn off, and the current values will be displayed.

2. If new sensors are added, subtracted, or multiple sensor channels are lost, press the

CHANNEL/+ button until the indoor channel is displayed. Press and hold the

CHANNEL/+ button for 3 seconds, and the remote search icon will be constantly

displayed for up to 10 minutes. Once the signal is reacquired, the remote search icon

will turn off, and the current values will be displayed.

5.7 Best Practices for Wireless Communication

Wireless communication is susceptible to interference, distance, walls and metal barriers. We

recommend the following best practices for trouble free wireless communication.

1. Electro-Magnetic Interference (EMI). Keep the console several feet away from computer

monitors and TVs.

2. Radio Frequency Interference (RFI). If you have other 433 MHz devices and