User manual

Press the MIN/MAX key again to display the minimum indoor humidity. Press and hold the

MIN/MAX key for three seconds to reset the minimum indoor humidity to the current value.

4.3 Outdoor Temperature Mode

Press the MODE button until the arrow (Î) is pointing at the outdoor temperature field.

4.3.1 Displaying and Resetting the Outdoor Temperature Min and Max

Values

Press the MIN/MAX key to display the maximum outdoor temperature. Press and hold the

MIN/MAX key for three seconds to reset the maximum outdoor temperature to the current value.

Press the MIN/MAX key again to display the minimum outdoor temperature. Press and hold the

MIN/MAX key for three seconds to reset the minimum outdoor temperature to the current value.

Note: This weather station supports up to three remote temperature sensors. Repeat this procedure

for Channels 2 and 3 if these sensors are installed.

4.4 Other Console Features

The following section describes additional console features.

4.4.1 Weather Forecasting and Tendency

Note: The weather forecast or pressure tendency is based on the rate of change of barometric

pressure. In general, when the pressure increases, the weather improves (sunny to partly cloudy) and

when the pressure decreases, the weather degrades (cloudy to rain).

The weather forecast is an estimation or generalization of weather changes in the next 24 to 48 hours,

and varies from location to location. The tendency is simply a tool for projecting weather conditions

and is never to be relied upon as an accurate method to predict the weather.

The weather tendency arrow shows positive (Ï) and negative (Ð) trends in barometric pressure.

4.4.2 Weather Icons

Sunn

Partl

Cloud

Rain

The four weather icons are Sunny, Partly Cloudy, Cloudy and Rainy. There are also two weather

tendency indicators to show the air pressure tendency between the weather icons.