User manual

When there is large amount of archived data to be uploaded, it may take a few minutes before the

system will respond to your requests. Otherwise, it will display the “read weather data fail” error

message, since the USB port is reading the data from the memory and the system is not able to

respond to requests.

7.5 EasyWeather Features

The following section outlines the features available in the EasyWeather Software.

7.5.1 Main Display

When you launch EasyWeather, the main display will be shown. The main display shows current

weather conditions, alarm conditions and minimum and maximum data.

Figure 20

When console is connected to PC, USB Connected will be displayed in the bottom right hand corner

of the main display panel. If the console is not connected, USB Unconnected will be displayed.

7.5.2 Set-up and Alarms

Select System | Setting from the menu bar to program general weather station console settings.

Note: Changing a console setting may take several minutes to update.

1. Time Zone. Programs the time zone as referenced in Section 6.1.

2. Interval. Archive interval for memory storage, as referenced in Section 6.12.

3. Unit. Changes units of measure on the display console for measured parameters.