User manual

Press or to select Yes or No. Press the key or key to confirm the selection.

2. Re-register Transmitter Outdoor. Re-synchronizes the wireless signal from the outdoor

sensor array. Press to highlight this field.

Press or key to select re-register indoor transmitter. Press or key to

popup the Message Box ”Are you sure you want to register the new outdoor transmitter?”

Press or to select Yes or No. Press the key or key to confirm the selection.

3. Clear History. Clears all of the historical data in archive memory. Press to highlight this

field.

Press or key to select re-register indoor transmitter. Press or key to

popup the Message Box ”Are you sure you want to clear history?” Press or to select

Yes or No. Press the key or key to confirm the selection.

4. Clear Max/Min. Clears all of the minimum and maximum values in stored memory. Press

to highlight this field.

Press or key to select re-register indoor transmitter. Press or key to

popup the Message Box ”Are you sure you want to clear the max/min?” Press or to

select Yes or No. Press the key or key to confirm the selection.

5. Reset to Factory Default. Clears all stored memory, calibrations and other variables to

factory default. Press to highlight this field.

Press or key to select re-register indoor transmitter. Press or key to

popup the Message Box ”Are you sure you want to reset to factory default?” Press or

to select Yes or No. Press the key or key to confirm the selection.

6. Backup data. Backup data to micro SD / TF card (see the Accessories section of this manual

for more information on micro SD / TF cards). Insert the micro SD / TF Card into the slot,

as shown in Figure 14.

Press to highlight this field. Press to enter the backup mode. Press or to

select the history year file. Press to confirm the selection, and the year field will turn

from green to purple. Press to start the backup, press key again to cancel the

backup.

The data is stored in comma separated value (csv) file format, which can be opened in

Microsoft Excel. The TF card can be read by a computer with an SD card adaptor.