User manual

2 Getting Started

Note: The power up sequence must be performed in the order shown in this section (insert

batteries in the remote transmitter(s) first, Display Console second).

The WS-16 weather station consists of a display console (receiver), and a probe thermometer (remote

transmitter).

2.1 Parts List

QTY

Item

Thermometer transmitter (FT007T)

Dimensions (LxHxW): 4.5” x 2.0” x 0.75”

Display Console

Frame Dimensions (LxHxW): 4.0 x 2.95 x 1.00 in

LCD Dimensions (LxW): 1.96 x 1.77”

LCD Segment Height: 0.78 inches

User Manual

2.2 Thermometer Sensor Set Up

Note: Do not use rechargeable batteries. We recommend fresh alkaline batteries for temperature

ranges between -4 °F and 140 °F and fresh lithium batteries for temperature ranges between -40 °F

and 140 °F.

1. Remove the battery door on the back of the sensor by removing the set screw, as shown in

Figure 1 .

Figure 1

2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the

transmitter.

Figure 2 displays all four switches in the OFF position (factory default setting).