User manual

Version 1.10 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 16
5.6.3 ObserverIP Connections
Connect the ObserverIP receiver power jack to AC power with the power adapter (included), as shown
in Figure 15, reference 10.
Connect the OberverIP receiver to your router using the Ethernet cable (included), as shown in Figure
15, reference 8.
Place the sensor array and indoor thermo-hygrometer transmitter about 5 to 10 feet from the
ObserverIP receiver and wait several minutes for the remote sensors to synchronize with the receiver.
Once synchronized, the Indoor blue LED (Figure 14, reference 2) and Outdoor blue LED (Figure 14,
reference 3) will be illuminated.
Ref.
LED
Description
1
RF
On when radio frequency receiver is operating properly
2
Indoor
On when indoor sensor received
3
Outdoor
On when outdoor sensor array received
4
Server
On when connected to Wunderground.com® internet hosting
service
5
ACT
Flashes when there is internet activity
6
Link
Connected to the Internet (or router)
7
Power
AC Power connected
Figure 14