User manual

Version 1.10 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 37
Figure 36
2. Clean the solar radiation sensor every 3 months with water and towel.
3. Replace rechargeable batteries every 2 to 3 years.
9.1 Advanced Rain Gauge Cleaning
If the rain gauge stops updating, it is possible for spiders and other insects to nest inside the sensor
array housing and interfere with the rain gauge mechanism.
1. Remove the six screws on the bottom of the sensor array, as shown in Figure 37.
2. CAREFULLY separate the top housing from the bottom housing. They cannot be completely
separated due to wires. DO NOT STRESS THE WIRES. Open the sensor housing slightly,
like a clam shell.
3. Clean any debris and spider webs, as shown in Figure 38.
Figure 37