User's Manual

Table Of Contents

1. Introduction

Thank you for your purchase of the Ambient Weather WS-07 Wireless

Indoor/Outdoor 8-Channel Thermo-Hygrometer with Jumbo Display. The

following user guide provides step by step instructions for installation, operation

and troubleshooting. To download the latest manual and additional

troubleshooting tips, please visit:

2.Getting Started

Note: The power up sequence must be performed in the order shown in

this section (insert batteries in the remote transmitter(s) first, Display Console

second).

The WS-07 weather station consists of a display console (receiver), and a

thermo-hygrometer (remote transmitter).

2.1 Parts List

2.2 Recommend Tools

Hammer and nail for hanging remote thermo-hygrometer transmitter.

2.3 Thermo-Hygrometer Sensor Set Up

Note: Do not use rechargeable batteries. We recommend fresh alkaline

batteries for outdoor temperature ranges between -4 °F and 140 °F and fresh

lithium batteries for outdoor temperature ranges between -40 °F and 140 °F.

1. Remove the battery door on the back of the sensor by removing the set

screw, as shown in Figure 1 .

http://ambientweather.wikispaces.com/ws07

QTY Item

Display Console

Frame Dimensions (LxHxW): 4.50 x 5.0 x 1.00 in

LCD Dimensions (LxW): 3.75 x 3.50”

LCD Segment Height: 1.25 inches

Thermo-hygrometer transmitter (FT007TH)

Dimensions (LxHxW): 4.5” x 2.0” x 0.75”