User's Manual

Table Of Contents

5.1 Min/Max Mode

The Min/Max mode displays the minimum and maximum temperature and

humidity (since reset of the unit) for the indoor, remote channel 1 through 8

sensors.

Prior to entering the MIN/MAX mode, press the CHANNEL/+ button to select

the temperature and humidity values you wish to view.

1. Display Maximum. Press the MIN/MAX button once to display the

maximum. The MAX icon will be displayed.

2. Clear Maximum. To reset the maximum values to the current values,

press and hold the CLEAR button for 3 seconds..

3. Display Minimum. Press the MIN/MAX button again to display

the minimum. The MIN icon will be displayed.

4. Clear Minimum. To reset the minimum values to the current values,

press and hold the CLEAR button for 3 seconds.

To return to normal mode, press the MIN/MAX button again.

5.2 Indoor/Outdoor Channel Selection

Press the CHANNEL/+ button to switch the display between the indoor

temperature and humidity remote sensors 1 through 8, and scroll mode In

scroll mode, all of the indoor and detected outdoor sensors will be displayed in

five second intervals.

5.4 Sensor Search Mode

If any of the sensor communication is lost, dashes (--.-) will be displayed on the

screen. To reacquire the signal:

1. If a specific channel is lost, press the CHANNEL/+ button to display this

channel, then Press and hold the CHANNEL/+ button for 3 seconds, and

the remote search icon will be constantly displayed for up to 10 minutes.

Once the signal is reacquired, the remote search icon will turn off, and

the current values will be displayed.

2. If new sensors are added, subtracted, or multiple sensor channels are lost,

press the CHANNEL/+ button until the indoor channel is displayed.

Press and hold the CHANNEL/+ button for 3 seconds, and the remote

search icon will be constantly displayed for up to 10 minutes. Once the

signal is reacquired, the remote search icon will turn off, and the current

values will be displayed.

5.3 Temperature Units of Measure

The default temperature units of measure are degrees Fahrenheit. To toggle

between degrees Celsius and degrees Fahrenheit, press and hold the MIN/MAX

button for 3 seconds.