User's Manual

Figure 12

3. Replace the battery door, and fold out the desk stand and place the console in the upright

position.

The console will instantly display indoor temperature, humidity, pressure, moon phase and

time. The wind speed, wind gust, wind direction, rain, outdoor temperature and humidity will

update on the display within a few minutes. Do not Press any menu buttons until the outside

transmitter reports in, otherwise the outdoor sensor search mode will be terminated. When

the outdoor transmitter data has been received, the console will automatically switch to the

normal mode from which all further settings can be performed.

While in the search mode, the remote search icon

will be constantly displayed.

If you have more than one thermo-hygrometer sensor (up to eight thermo-hygrometer sensors

are supported), the display will automatically toggle between sensors until all sensors have

reported in.

If it does not update, please reference the troubleshooting guide in Section 12.

Note: The power adapter is intended to be correctly oriented in a vertical or floor

mounted position. The prongs are not designed to hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.