User's Manual

Version 1.0 ©Copyright 2016, Ambient LLC. All Rights Reserved. Page 19
Remove the rain gauge funnel from the base prior to installation by rotating the counter clockwise
until the tabs on the base and the funnel align, then pulling upwards.
Fasten the rain gauge to the mounting pole, as shown in Figure 16.
Figure 16
Tighten the rain gauge to your mounting pole or bracket with two U-bolts and four M5 nuts , or fix
on a horizontal surface with the four tapping screws, as shown in Figure 17.
Reattach the funnel by aligning the tabs on the funnel and base, and rotate clockwise.
Figure 17