User's Manual

Version 1.0 ©Copyright 2016, Ambient LLC. All Rights Reserved. Page 20
6.3 ThermoHygrometerInstallation
It is recommended you mount the remote sensor outside in a shaded area. A north facing wall is
preferred because it is in the shade most of the day. Direct sunlight and radiant heat sources will
result in inaccurate temperature readings. Although the sensor is water resistant, it is best to mount
in a well protected area, such as under an eve. Use a screw or nail (not included) to affix the
remote sensor to the wall, as shown in Figure 0.
Figure 20
7 ConsoleOperation
Note: The console has five operational keys: HISTORY/- key, SET key, ALARM key,
CHANNEL/+ and SNOOZE/LIGHT key.
7.1 QuickDisplayMode
Note: To exit the Quick Display Mode at any time, press the SNOOZE/LIGHT button on the
top of the display console.
While in Normal Mode, press (do not hold) the SET key to enter the Quick Display Mode as
follows:
• once for time, time/week and date,
• twice for rainfall.
• three times for pressure.
• four times for 72h or 24h graph record
1. Time, Time/Week and Date. Press the CHANNEL/+ or HISTORY/- key to toggle
between time, time/week and date.