User's Manual

mode. Press the [+] key to switch between MM-DD-YY, DD-MM-YY.

5. Change Month. Press the SET key again to set the calendar month. Press the [+] key or [-]

key to adjust the calendar month.

6. Change Day. Press the SET key again to set the calendar day. Press the [+] key or [-] key to

adjust the calendar day.

7. Change Year. Press the SET key again to set the calendar year. Press the [+] key or [-] key to

adjust the calendar year.

8. Max/Min Clearing (default: ON). Press the SET key again to set the max/min clearing

mode (CLR). The Max/Min can be programmed to clear daily (at midnight) or manually.

Press the [+] key or [-] key to switch between “Clears 24h” and Clears Manually.

9. Temperature Units of Measure (default: °F):. Press the SET key again to change the

temperature units of measure (the UNITSET icon will be displayed). Press the [+] key or [-]

key to switch between °F and °C units of measure.

10. Wind Speed Units of Measure (default: mph). Press the SET key again to change the wind

speed units of measure . Press the [+] key or [-] key to toggle the wind speed units between

m/s, km/h, mph, knots or bft.

11. Rainfall Units of Measure (default: inch). Press the SET key again to change the Rainfall

units of measure. Press [+] key or [-] key to toggle the rainfall units between mm and inch.

12. Barometric Pressure Display Units (default: inHg). Press the SET key again to change the

pressure units of measure. Press the [+] key or [-] key to toggle the pressure units between

mmhg, inHg or hPa.

13. Backlight Color Setting (default: Outdoors). Press the SET key again to set the backlight

color defined parameter (the LED icon will be displayed). Press [+] key or [-] key to toggle

between IN (uses the indoor temperature to automatically display backlight color), OUT

(uses

the channel 1 temperature to automatically display backlight color) or USE (manually set

your own backlight color to one of 11 choices).

The following section is based on the OUT, IN or USE setting selected.

13.1 OUT Backlight Color Setting (reference Figure 18).

13.2 Outdoor Backlight Color Low (OUT default: 10): Press the SET key again to

change the lower range of the color changing backlight spectrum (the LOWER icon will

be displayed). Press the [+] key or [-] key to adjust the low temperature limit.

13.3 Indoor Backlight Color High (default: 100): Press the SET key again to change the

upper range of the color changing backlight spectrum (the UPPER icon will be

displayed).

13.4 IN Backlight Color Setting (reference Figure 18).

13.5 Indoor Backlight Color Low (IN default: 58): Press the SET key again to change

the lower range of the color changing backlight spectrum (the LOWER icon will be

displayed). Press the [+] key or [-] key to adjust the low temperature limit.

13.6 Indoor Backlight Color High (default: 85): Press the SET key again to change the

upper range of the color changing backlight spectrum (the UPPER icon will be

displayed).