User's Manual

• indoor humidity graph (the HUMI-IN icon is displayed)

• outdoor temperature graph (the TEMPOUT icon is displayed)

• outdoor humidity graph (the HUMIOUT icon is displayed)

Note: The outdoor humidity and temperature graph will display the history graph of the

current channel displayed.

7.7 ResetMin/Maxrecord

Note: If you own more than one thermo-hygrometer sensor, the minimum and maximum

value of all channels will be cleared in the reset mode.

In normal mode, press (do not hold) the ALARM key, and the MAX icon will be displayed. Press

the HISTORY/- key to view rainfall (1h, 24h, week or month) and pressure (ABS or REL) max

value.

Next, press the SET key for three seconds to clear the rainfall, wind speed, wind gust, pressure,

temperature and humidity maximum values. The maximum values will now display the current

values.

Press the ALARM key again (do not hold), and the MIN icon will be displayed. Press the

HISTORY/- key to view pressure (ABS or REL) min value.

Next, press the SET key for three seconds to clear the pressure, temperature and humidity

minimum values. The minimum values will now display the current values.

Press the SNOOZE/LIGHT key to exit the min/max checking and cleaning mode, return to

normal display mode.

7.8 SnoozeMode

If the alarm sounds, and you wish to silence the alarm, press the SNOOZE/LIGHT key, the

backlight will turn on. The alarm icon will continue to flash and the alarm will silence for five

minute. Press any key (HISTORY/+ ,SET, ALARM,CHANNEL/+) to permanently exit the

Snooze mode.

7.9 BacklightMode

IF the LED is off, press the LIGHT button once. The backlight will turn on for five seconds, and

if no operation is performed for three seconds, the backlight will turn off.

Press and hold the LIGHT key for two seconds, and the backlight will turn on permanently, and