User's Manual

11.2MeasurementSpecifications

The following table provides specifications for the measured parameters.

Measurement Range Accuracy Resolution

Indoor Temperature 32 to 140 °F ± 1 °F 0.1 °F

Outdoor Temperature -40 to 140 °F ± 1 °F 0.1 °F

Indoor Humidity 10 to 99 % ± 5% (only guaranteed

between 20 to 90%)

1 %

Outdoor Humidity 10 to 99% ± 5% (only guaranteed

between 20 to 90%)

1 %

Rain 0 to 396in <0.6in: ±0.04in,

0.6in to 396in: ±7%

<39.4in (0.012in)

>39.4in (0.04in)

Wind Direction 0 - 360 º 45º (8 point compass) 45º (8 point compass)

Wind Speed 0 to 112mph 4.5 mph ~22.4mph: ±

6.7mph, 22.4mph ~112mph:

±10% (whichever is greater)

0.1mph

Barometric Pressure:

8.85 to 32.50 inHg ± 0.08 inHg 0.01 inHg

11.3PowerConsumption

• Base station (display console) : 4 x AA 1.5V Alkaline or Lithium batteries (not included)

• Adaptor: 6V~ 500mA

• Thermo-hygro Sensor : 2 x AAA alkaline batteries or Lithium batteries (not included)

• Rain sensor: 4 x AAA alkaline batteries or Lithium batteries (not included)

• Wind sensor: 4 x AAA alkaline batteries or Lithium batteries (not included)

• Battery life: Minimum 12 months for base station with excellent reception. Intermittent

reception and multiple sensors may reduce the battery life.

Minimum 12 months for sensors (use lithium batteries in cold weather climates less than

-4 °F)

12TroubleshootingGuide

Problem Solution

Wireless remote (thermo-hygrometer) not

reporting in to console.

There are dashes (--.-) on the display

console.

If any of the sensor communication is lost, dashes (--.-)

will be displayed on the screen. To reacquire the signal,

press and hold the CHANNEL/+ button for 3 seconds,

and the remote search icon

will be constantly

displayed. Once the signal is reacquired, the remote

search icon

will turn off, and the current values